How to check the packaging and accessories of Yokogawa Model 701905 conversion cable?

Connect differential probe: Insert the metal BNC connector of differential probe (701977/701978) into the metal BNC connector of 701905 to ensure smooth signal transmission path.

Power supply connection: Connect the power terminal of the differential probe to the probe power terminal of the measuring instrument (the measuring instrument needs to have the "probe power output" option); If the instrument does not have this terminal, a power supply (model 701934) sold separately by Yokogawa can be used for power supply.

Power on test: After confirming that all connections are correct, turn on the power of the measuring instrument and check if the signal transmission is normal.

3. Multi probe scenario (up to 4 differential probes)

If multiple differential probes need to be used simultaneously, repeat steps 2-5 above:

Each differential probe needs to be paired with one 701905 conversion cable.

The grounding plug is stacked through a "stacking connector" (up to 4) to ensure that each grounding plug is reliably grounded.

Technical specifications

Specification project specific parameter description

The rated voltage of 42 V needs to be used for a long time within the rated voltage range. Overvoltage may damage the insulation layer of the cable

The working temperature range of 5~40 ℃ may cause a decrease in cable performance and unstable signal transmission beyond this range

The total length of the cable is about 310 mm, including connectors at both ends, suitable for the wiring requirements of conventional measurement scenarios

The length of the grounding cable is about 300 mm, including the grounding plug, to ensure flexible wiring between the grounding terminal and the insulation module

Weight (including plug) about 50g, lightweight design reduces cable load during measurement, easy to operate

Maintenance and disposal

1. Daily maintenance

Appearance inspection: Before use, check whether the cable insulation layer is damaged, whether the connector is corroded or deformed. If there is any damage, stop using and contact Yokogawa for repair or replacement.

Cleaning: Use only a dry soft cloth to wipe the surface of the cable. Do not use solvents, alcohol, or abrasives to avoid damaging the insulation layer or connector coating.

Storage: When idle, the cable should be placed in a dry and ventilated environment, avoiding direct sunlight, high temperature, or humidity to prevent insulation layer aging.

2. Disposal of waste

When discarding, it is necessary to follow local laws and regulations, classify and dispose of cables and other electronic waste, and prohibit arbitrary disposal.

If the cable contains metal components (such as BNC connectors, grounding plugs), metal recycling can be carried out according to local regulations to reduce environmental impact.