For CP29xx-0000, ensure the use of high-quality DVI cables with a total length of no more than 50m, as long or poor quality DVI cables may cause blurry or color cast images.
USB device cannot recognize 1. Cable too long
2. Not using USB-E converter. 1. Check if the length exceeds the USB specification limit.
2. If CP29xx-0000 exceeds 5m, CU8801 must be used.
TwinCAT access error via USB. TwinCAT cycle time is too fast. In TwinCAT settings, increase the cycle time from 10ms to 50ms~80ms.
Quick Overview of Technical Parameters
Power supply: 24V DC (22-30V), NEC Class 2, peak current needs to be calculated according to the official website data sheet.
Protection level: front panel IP65 (dustproof, waterproof), rear panel IP20 (solid with a diameter of 12.5mm).
Ambient temperature
CP29xx-0000 (DVI/USB version): Run at 0 ° C~+55 ° C
CP29xx-0010 (CP Link Version 4): Running at 0 ° C~+50 ° C
Storage/transportation: -20 ° C~+65 ° C
Humidity: Maximum 95%, no condensation.
Vibration resistance: EN 60068-2-6, 5~500Hz, 0.5G.
Impact resistance: EN 60068-2-27, 5G, 30ms.
