WOODWARD CPC-II Current-to-Pressure Converter

Key advantages

High reliability: With mature mechanical structure design, redundant configuration, and strong oil resistance, the equipment can operate stably for a long time even under harsh working conditions, reducing the probability of failure.

High control accuracy: High precision pressure conversion and linear valve control ensure the accuracy of turbine speed and load control, improve energy utilization efficiency, and reduce equipment wear.

Strong compatibility: Adopting standard installation and hydraulic connection methods, it can seamlessly integrate with various turbine control systems and easily upgrade existing CPC or Voith converters.

Good safety: When an internal unit failure occurs, the valve reset spring immediately acts, causing the CPC to switch to the fault safe position, draining the oil, ensuring the safe closure of the turbine control valve, and effectively protecting the equipment.

Fully certified: Meets North American hazardous site certification requirements, complies with CE directives such as ATEX, Machinery Directive, PED, and EMC, and can be safely used in a variety of complex environments.

Precautions

Installation environment: Although it can be installed in any posture, it should be avoided as much as possible in environments with strong vibration, high humidity, and corrosive gases to ensure stable equipment performance.

Oil quality: Clean hydraulic oil that meets the equipment requirements should be used, and the oil quality and level should be checked regularly to prevent oil problems from affecting the normal operation of the equipment.

Maintenance: Regularly use software service tools to monitor and diagnose the status of equipment, replace vulnerable parts such as seals in a timely manner, and ensure long-term stable operation of the equipment.

Parameter setting: When using Service Tool for configuration and parameter setting, it is necessary to strictly follow the equipment manual to avoid equipment failure caused by incorrect parameter settings.