ABB INNIS21 Network Interface Slave module

ABB INNIS21 Network Interface Slave module

Basic product information

Specific content of information category

Product ID INNIS21

ABB Model Identification INNIS21

Product catalog description Network Interface Slave module

Product type: Communication-Module

Order and customs related information

HS code: 851762, corresponding to the product category of "telephone (including telephone for cellular or other wireless networks); other devices used for transmitting or receiving voice, image or other data (including wired or wireless networks such as local area networks, wide area network communication devices), but excluding transmission or reception devices of items 84.43, 85.25, 85.27 or 85.28; other devices used for transmitting or receiving voice, image or other data (including wired or wireless networks such as local area networks, wide area network communication devices): machines for receiving, converting and transmitting or reproducing voice, image or other data (including switching and routing devices)"

Customs tariff code: 85176200

Size and weight

Specific numerical values for specification items

Product net depth/length 73.66 millimeters (mm)

Product net height 358.14 millimeters (mm)

Product net width 271.78 millimeters (mm)

Net weight of product 0 kilograms (kg)

Environment and classification related

WEEE category: 5 categories (small equipment, no external dimensions exceeding 50 centimeters)

Product classification path: Control Systems → Symphony Plus → Controllers → HR series (Harmony Rack) Hardware → SPNIS21

Precautions

Safety specifications are generally applicable to control system handling. Instructions and warnings related to a specific subject or operation of the product.

The following norms must be strictly observed:

  must strictly comply with the technical specifications and typical applications of the product system

  Personnel training: Only trained personnel shall install, operate, maintain or repair the product system. must

Provide guidance and explanation of the situation in danger areas to these personnel.

  Unauthorized changes: Changes or structural changes to the product system may not be made.

  Maintenance responsibility: Must ensure that the product system is used only under appropriate conditions and in full fitness for use.

 Working environment: The user must meet the specified environmental conditions:

Safety regulation

The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Verify that the installation is complete.

4 Ground and short-circuit the device.

Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must

Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.

Installation precautions

First, the importance of industrial equipment installation

In modern industrial production, various equipment and machines are widely used in various fields, such as manufacturing, energy industry, chemical industry and so on. The installation of industrial equipment is directly related to production efficiency and product quality. Proper installation and commissioning of good equipment can ensure the stable operation of the production line, improve production efficiency and product quality, reduce maintenance costs, and ensure the safety of employees.

Second, the steps of industrial equipment installation

1. Preparation: Before the installation of industrial equipment, it is necessary to carry out adequate preparation work. This includes the tools and equipment required for installation, cleaning and preparation of the installation site, and making installation plans and schedules.

2. Determine the installation position: Determine the installation position of the equipment according to the requirements of the equipment and the layout of the production line. When determining the location, the weight and size of the equipment need to be considered, as well as the coordination of the equipment with the surrounding environment.

3. Install the device: Assemble and install the device according to the installation instructions. Ensure that the device is securely and accurately connected, while protecting the appearance and internal components of the device.

4. Connect power supplies and pipelines: For devices that require power supplies and power supplies, properly connect power supplies and pipelines. The connection of power supply and pipeline should comply with safety standards to avoid hazards such as electric shock and leakage.

5. Commissioning the device: After the installation is complete, you need to commission the device to ensure that the device can run properly. It includes checking the functions and performance of the equipment, adjusting the parameters and Settings of the equipment, and carrying out the necessary tests and inspections.

6. Training operators: After the installation of the equipment, it is necessary to train the operators to understand the operation methods and precautions of the equipment, and improve the operation skills and safety awareness of the employees.