ABB Procontic T20G Programmable Controller

and data is stored in 24-kbyte battery-backed RAM, allowing the user to create text content via the programming unit or other display devices.

907 KP 64 Software: The 907 KP 64 software is used to write programmes for the RCOM 07 KP 64 communications processor 

and runs on IBM compatible PCs of the 07 PC 32 and 07 PH 32 types. 

It supports communication between the ABB MasterPiece 200 and the T200 system, 

with the 07 KP 64 unit acting as either a RCOM master or a slave. Up to 254 RCOM slaves can be operated in a network (up to 8 with Masterpiece 200). 

The software offers a wide range of communication functions such as cold start, hot start, reset, clock synchronisation, data read/write and event polling, 

as well as an additional operator interface according to the EIA RS-232-C standard for commissioning and configuration work.