SUMITOMO AC6000M Stainless Steel Turning Guide

316L shell processing

Use SNMG433EGU (AC6020M) for continuous machining with cutting parameters of vc=590 SFM, f=. 010 IPR, ap=. 098 inches, wet cut. The excellent anti chipping performance of AC6020M has increased the tool life by 30%, and the cutting edge remains stable after processing 42 pieces, while conventional M20 tools only produce chipping after processing 31 pieces.

430 motorcycle component processing

Continuous machining using CNMG431EEF (AC6030M) with cutting parameters of vc=394 SFM, f=. 004 IPR, ap=. 031-0.059 inches, wet cutting. AC6030M provides stable machining surface quality, with tool life twice that of its competitor M30 product. It remains stable even after processing about 1200 pieces, while its competitor only processes about 580 pieces.

Casting stainless steel pump parts processing

Continuous machining was performed using CNMG432EEG (AC6030M) with cutting parameters of vc=328 SFM, f=. 012 IPR, ap=. 020 inches, wet cutting. AC6030M achieved double tool life at 2.5 times efficiency (VC increased from 197 to 328 SFM, f increased from. 008 to. 012 IPR), and the cutting edge remained intact after processing 2 pieces, while the competitor M30 product only experienced wear after processing 1 piece.

316L flange processing

Use CNMG432EGU (AC6135M) for machining, with cutting parameters of vc=492 SFM, f=. 010 IPR, ap=. 059 inches, wet cut. AC6135M suppresses crescent wear, and the tool life is 2.5 times that of the competitor M30 PVD product. After processing 5 pieces, the cutting edge remains stable, while the competitor only processes 2 pieces.

316L valve processing

Use CNMG432EEH (AC6145M) for intermittent machining, with cutting parameters of vc=361 SFM, f=. 006 IPR, ap=. 059 inches, wet cutting. AC6145M suppresses blade breakage, with a tool life 1.3 times that of the competing M40 PVD product. Even after processing 5 pieces, the cutting edge remains intact, while the competing product only processed 4 pieces and experienced blade breakage.

316L screw processing

Use CNMG432EGU (AC6145M) for intermittent machining, with cutting parameters of vc=361 SFM, f=. 006 IPR, ap=. 059 inches, wet cutting. AC6145M suppresses chipping and hot cracking, achieving stable machining. After processing, the cutting edge of AC6145M remained intact, while the competitor M30 PVD product showed obvious hot cracks and chipping.