Configuration tool: For DeviceNet networks, the "DeviceNet Wizard" configuration tool provided by Toshiba can be used, or the DN111M EDS file can be downloaded from the ODVA official website and used in other mainstream configuration software.
Key points of system design and application
Power planning: It is necessary to calculate the total current of 5VDC for all modules (especially analog and communication modules with high power consumption) to ensure that it does not exceed the power supply capacity of the main unit under specific operating conditions.
Module layout: FR112M must be installed at the far right end; There is no limit to the location of DN111M, but only one is allowed in a system.
Environment and Compliance: When DN111M is used in systems that comply with CE certification, it is necessary to strictly follow the manual requirements to install magnetic rings on the cables, implement shielding layer grounding, and lay the cables in metal conduit slots.
Programming precautions: Avoid directly dividing SW54 to avoid accidentally changing the value of adjacent register SW55.
