Relative humidity: The relative humidity requirement is between 10% and 90%, and it is required to be in a non condensing state. Within this humidity range, the equipment can avoid problems such as circuit short circuits and corrosion caused by high humidity, ensuring the stability of the electrical and mechanical performance of the equipment.
Other specifications: The DTB master-slave mode of the VMEbus interface supports multiple data transmission methods, such as BLT32/BLT64, A32/D32, etc; The requester is programmable and supports multiple modes; Interrupt handlers and arbitrators also have corresponding functions and modes. The PMC expansion site connector supports 5V signals and is suitable for Type 1 and Type 2. It uses a 32-bit PCI bus and has a maximum frequency of 33MHz. These specifications ensure the performance and compatibility of the device in terms of data transmission, interrupt handling, and expansion functions.
MTBF: The average time between failures (MTBF) is 118633 hours (Bellcore), which reflects the reliability of the equipment. It means that under normal use, the equipment can operate stably for a long time, reducing the frequency of failures and lowering maintenance costs
email:1583694102@qq.com
wang@kongjiangauto.com