Welcome to the Industrial Automation website!

NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Types and prevention measures of mine geological disasters

来源: | 作者:佚名 | 发布时间 :2024-01-11 | 742 次浏览: | Share:

2.1.4 Movement of rock and soil mass on slope

This kind of disaster is caused by the unstable structure of geological slope or surface fault edge in mining area, such as collapse, landslide, debris flow and so on. For example, the instability of mining slope often causes disasters such as rock and soil landslide, rock fall and so on, and the soil slope forms fluid soil after rain, forming disastrous debris flow and so on. The main causes of these geological disasters are irrational mining and stripping disorders, slope Angle is too steep and so on to form unstable structures. This type of mine geological disasters mostly occur in open-pit mining or excavation mining mines. This kind of disaster often occurs instantaneously, but the result is more harmful, such as mine landslide, often destroy the minerals, cause a large number of casualties, great harm, is a typical example of such disasters.

2.1.5 Mine engineering disaster

Irrational mining means and off-hand mining methods often lead to underground engineering disasters, such as cave-in, roof fall, sideway, bottom heave, rock burst and so on. These disasters are due to the crustal stress changes in the rock and soil layers in the mine and mine, resulting in the sudden release of rock and soil stress, resulting in a large number of rocks and debris, and bursting into the pit, which brings harm to the mine mining, critical miners' safety and property losses. For example, the rock burst in the pit is due to the surrounding and top and bottom wall rocks, under the condition of huge rock ring stress, once the mining surface can not maintain balance, it is possible to produce a sudden release of rock ring stress, resulting in rock rupture and burst, and a large number of jets into the pit, explosion, thus bringing devastating disasters to the mine.

2.2 Disaster of groundwater table variation

In the process of mining, deep mining sometimes destroys the structural stability of groundwater free shallow water layer or laminated aquifer, and then causes the change of groundwater level and mine geological environment, resulting in disastrous consequences.

2.2.1 Water inrush in mine

Water inrush and water gushing are one of the most common mine disasters. Due to the rapid change of the water table in a short time, the mine suddenly flooded. This kind of mine geological disaster is sudden and large scale, resulting in very serious consequences. In the process of mining, due to the insufficient estimation of the discharge rate of the inflow of water in the mine, the mining process often penetrates the water barrier fault, or suddenly encounters the water storage cave and underground river, resulting in a large number of groundwater gushing, resulting in the flood of pits and Wells, resulting in casualties or other serious catastrophic consequences. This kind of disaster occurs frequently in mines with serious illegal mining, mostly due to low mining technology and illegal mining. Sand gushing in the pit is the associated disaster of water inrush in the mine. When the aquifer or karst cave rich in sediment is encountered in the mining process, after the water-barrier layer is broken, sediment and rock debris rush into the mine together with the water, resulting in slurry gushing disaster. Other permeable faults and diving layers often leak into the pit because of fault dislocation and inclusion of sediment, which results in the mine being blocked by mud, equipment and mining personnel being buried by sand, resulting in disastrous consequences for the mine.

2.2.3 Groundwater leakage

Due to mining, the condition of groundwater burial is destroyed, and the water supply of groundwater cannot keep up with the speed of consumption. For example, mining caused by the diversion of underground rivers, excessive mining damage to the diving layer, these changes in the geological environment, resulting in an extraordinary decline in the groundwater level, from the underground water source depletion disaster, and then lead to the loss of river water, spring dry up, resulting in local arid areas.

2.3 Disasters caused by ore bodies

This kind of mine geological disaster is often caused by some accidental factors after the change of mine geological environment.

2.3.1 Gas explosion

Gas explosion disasters are most common in large and small coal mines. Due to poor ventilation conditions in the mine, gas accumulates in the closed space to a certain extent, and accidental factors cause explosions. This kind of disaster often results in the death of mining personnel and injuries, and the mine is damaged by violent explosions, resulting in huge personnel and property losses.

2.3.2 Spontaneous combustion of coal seam

Due to the coal seam mining, part of the mining surface is exposed to the air, and some coal mines gradually increase the temperature due to oxidation and exothermic heat. After the heat accumulation, the temperature rises rapidly, and when the temperature rises to the ignition point of coal, it will cause combustion. Spontaneous combustion of coal seam has occurred in ancient and modern times. The coal resources destroyed by spontaneous combustion of coal seam in China are up to 200 million tons every year, and the economic loss is huge.

  • GE Hydran M2-X Transformer Condition Monitoring Device
  • FOXBORO P0916VL control module
  • FOXBORO P0916VC High Performance Terminal Cable
  • FOXBORO P0916WG system module
  • FOXBORO P0972ZQ interface channel isolation 8-input module
  • FOXBORO P0973BU high-frequency fiber optic jumper
  • FOXBORO P0926MX Splasher Confluencer
  • FOXBORO P0961S connector module
  • FOXBORO P0903NU system module
  • FOXBORO CM902WM control module
  • FOXBORO P0972VA ATS Processor Module
  • FOXBORO P0916Js digital input terminal module
  • FOXBORO PO961BC/CP40B control module
  • FOXBORO PO916JS Input/Output Module
  • FOXBORO PO911SM Compact Monitoring Module
  • FOXBORO P0972PP-NCNI Network Interface Module
  • FOXBORO P0971XU Control System Module
  • FOXBORO P0971DP Controller
  • FOXBORO P0970VB control module
  • FOXBORO P0970BP (internal) cable assembly
  • FOXBORO P0961EF-CP30B High Performance Digital Output Module
  • FOXBORO P0961CA fiber optic LAN module
  • FOXBORO P0926TM Modular I/O PLC Module
  • FOXBORO P0916BX series control system input/output module
  • FOXBORO P0916AG Compression Period Component
  • FOXBORO P0916AC I/A series module
  • FOXBORO P0912CB I/O Terminal Module
  • FOXBORO P0911VJ high-precision control module
  • FOXBORO P0911QC-C 8-channel isolated output module
  • FOXBORO P0911QB-C High Performance Industrial Module
  • FOXBORO P0903ZP Embedded System Debugging Module
  • FOXBORO P0903ZN control module
  • FOXBORO P0903ZL High Frequency Industrial Module
  • FOXBORO P0903ZE I/A series fieldbus isolation module
  • FOXBORO P0903NW Industrial Control Module
  • FOXBORO P0903NQ control module
  • FOXBORO P0903AA Industrial Control Module
  • FOXBORO FBM205 cable
  • FOXOBORO P0960HA I/A series gateway processor
  • FOXBORO P0926TP high-performance control module
  • FOXBORO P0926KL control module
  • FOXBORO P0926KK PLC system functional module
  • FOXBORO P0924AW wireless pressure transmitter
  • FOXBORO P0916NK differential pressure transmission cable
  • FOXBORO P0916JQ PLC module
  • FOXBORO P0916JP I/A series control module
  • FOXBORO P0916GG Digital Input Module
  • FOXBORO P0916DV I/A series digital input module
  • FOXBORO P0916DC Terminal Cable
  • FOXBORO P0916DB I/A series PLC module
  • FOXBORO P0914ZM recognition module
  • FOXBORO P0902YU control module
  • FOXBORO P0901XT Process Control Unit
  • FOXBORO P0800DV fieldbus extension cable
  • FOXBORO P0800DG Standard Communication Protocol Module
  • FOXBORO P0800DB Universal I/O Module
  • FOXBORO P0800DA Industrial Control Module
  • FOXBORO P0800CE control module
  • FOXBORO P0700TT Embedded System
  • FOXBORO P0500WX Control System Module
  • FOXBORO P0500RY Terminal Cable Assembly
  • FOXBORO P0500RU control module
  • FOXBORO P0500RG Terminal Cable
  • FOXBORO P0400ZG Node Bus NBI Interface Module
  • FOXBORO P0400GH fieldbus power module
  • FOXBORO FBM207B Voltage Monitoring/Contact Induction Input Module
  • FOXBORO FBM205 Input/Output Interface Module
  • FOXBORO FBM18 Industrial Controller Module
  • FOXBORO FBM12 Input/Output Module
  • FOXBORO FBM10 Modular Control System
  • FOXBORO FBM07 Analog/Digital Interface Module
  • FOXBORO FBM05 redundant analog input module
  • FOXBORO FBM02 thermocouple/MV input module
  • FOXBORO FBI10E fieldbus isolator
  • FOXBORO DNBT P0971WV Dual Node Bus Module
  • FOXBORO CP30 Control Processor
  • FOXBORO CM902WX Communication Processor
  • FOXBORO AD202MW Analog Output Module
  • FOXBORO 14A-FR Configuration and Process Integration Module
  • FOXOBORO 130K-N4-LLPF Controller
  • FUJI FVR004G5B-2 Variable Frequency Drive
  • FUJI FVR008E7S-2 High Efficiency Industrial Inverter
  • FUJI FVR008E7S-2UX AC driver module
  • FUJI RPXD2150-1T Voltage Regulator
  • FUJI NP1PU-048E Programmable Logic Control Module
  • FUJI NP1S-22 power module
  • FUJI NP1AYH4I-MR PLC module/rack
  • FUJI NP1BS-06/08 Programmable Controller
  • FUJI NP1X3206-A Digital Input Module
  • FUJI NP1Y16R-08 Digital Output Module
  • FUJI NP1Y32T09P1 high-speed output module
  • FUJI NP1BS-08 Base Plate​
  • FUJI A50L-2001-0232 power module
  • FUJI A50L-001-0266 # N Programmable Logic Control Module
  • GE GALIL DMC9940 Advanced Motion Controller
  • GE DMC-9940 Industrial Motion Control Card
  • GE IS200AEADH4A 109W3660P001 Input Terminal Board
  • GE IC660HHM501 Portable Genius I/O Diagnostic Display
  • GE VMIVME 4140-000 Analog Output Board
  • GE VMIVME 2540-300 Intelligent Counter
  • GE F650NFLF2G5HIP6E repeater
  • GE QPJ-SBR-201 Circuit Breaker Module
  • GE IC200CHS022E Compact I/O Carrier Module
  • GE IC695PSD140A Input Power Module
  • GE IC695CHS016-CA Backboard
  • GE IC800SS1228R02-CE Motor Controller
  • GE IS215WEMAH1A Input/Output Communication Terminal Board
  • GE CK12BE300 24-28V AC/DC Contactor
  • GE CK11CE300 contactor
  • GE DS3800NB1F1B1A Control Module
  • GE VMIVME2540 Intelligent Counter
  • GE 369B1859G0022 High Performance Turbine Control Module
  • GE VME7865RC V7865-23003 350-930007865-230003 M AC contactor
  • GE SR489-P5-H1-A20 Protection Relay
  • GE IS200AEPGG1AAA Drive Control Module
  • GE IS215UCCCM04A Compact PCI Controller Board
  • GE VME7768-320000 Single Board Computer
  • GE SR489-P5-LO-A1 Generator Protection Relay
  • GE IS215WETAH1BB IS200WETAH1AGC Input/Output Interface Module
  • GE D20 EME210BASE-T Ethernet Module
  • GE IS200EXHSG3REC high-speed synchronous input module
  • GE IS200ECTBG1ADE exciter contact terminal board
  • GE VPROH2B IS215VPROH2BC turbine protection board
  • GE F650BFBF2G0HIE feeder protection relay
  • GE SLN042 IC086SLN042-A port unmanaged switch
  • GE SR489-P1-HI-A20-E Generator Management Relay
  • GE IS400JPDHG1ABB IS410JPDHG1A track module
  • GE IS410STAIS2A IS400STAIS2AED Industrial Control Module