ABB 22mm series industrial control component models

ABB 22mm series industrial control component models

Push buttons

1. Standard button (KP series)

Non illuminating type:

KP1-10X (flat button): such as KP1-10R (red), KP1-10G (green), supports instantaneous operation.

KP2-10X (Flat Head Hold Button): Keep pressed for continuous control of the scene.

KP3-10X (Extended Button): Suitable for scenes that require a noticeable tactile sensation.

Lighting type:

KP1-11X (flat head lighting button): such as KP1-11R (red lighting), built-in light block (KLB-1), supports 24V/115V/230V voltage.

2. Dual button (KPD series)

KPD1-11B (Double Flat Head Button): integrates two buttons for combined control (such as start/stop), supports lighting function (such as KPD1-11R red lighting).

3. Mushroom Head Button (KPM Series)

KPM1-10R (40mm mushroom head, instantaneous): Used for emergency operations, mainly red, supports rotary release (KPMT) or key release (KPMK).

KPMT3-10R (emergency stop button with twist release): meets safety standards and has a protection level of IP66.

4. Key lock button (KPK series)

KPK1-101 (hold type): requires key operation to prevent accidental touch, suitable for permission control scenarios, supports different key codes (71/72/73).

Select switches

1. Two/three position selector switch (K2SS/K3SS series)

K2SS1-10R (two non illuminated): manual switching, status feedback through contacts (NO/NC).

K3SS1-11G (three position lighting type): The middle position is "OFF", the two sides are functional positions, and it supports LED indicator lights.

2. Key operation selection switch (K2SSK/K3SSK series)

K2SSK1-10I (two key switch): requires key rotation for switching, used for safety control, supports coded keys (I=71/72/73).

3. Vertical installation selection switch (K2SSV/K3SSV series)

K2SSV1-10R: Designed specifically for vertical panels, suitable for narrow spaces, with flexible operating angles.

Flip Switches (KTS series)

KTS1-10B (two non illuminating): Simple switching function, such as power on/off, with contacts supporting 16A current.

KTS1-11C (two position lighting type): with transparent lampshade, status visualization, suitable for operation inside the control cabinet.

Indicator lights (Pilot Lights, KL series)

KL1-100R (red non illuminated): pure indication function, no operation button.

KL1-11G (green lighting type): Built in LED or incandescent lamp, supports 24V DC power supply, brightness up to 1000 mcd (green LED).

Signal Towers&Beacons

1. Signal tower (K70 series)

KL70-401R (red constant light module): A single-layer optical signal module that supports BA15d bulbs and can be stacked with multiple layers (up to 5 layers).

KB70-1201 (buzzer module): Integrated sound alarm, supports 24V/115V/230V, volume 85-100 dB.

2. Beacon (KSB series)

KSB-401R (red constant light beacon): IP65 protection, suitable for outdoor use, supports xenon or LED lights, with adjustable flashing frequency