It is recommended that new users quickly verify hardware functionality through ACE's software panel, and then gradually delve into DMA and synchronization configuration. Board ID is disabled by default and needs to be enabled in the D2K-DASK tool for multi card recognition.
Engineering application examples
Multi channel arbitrary waveform generator: Using the 8-channel synchronous output of 2502, combined with external reference and SSI synchronous multi card, it can generate phase array signals for automotive radar testing.
Closed loop control system: AI collects controlled signals (400kS/s), calculates them through control algorithms, and outputs control quantities (1MS/s) in real-time through AO, forming a high-speed control loop.
Frequency sweep excitation response test: Using segmented generation and iterative modes, different frequency sine waves are sequentially output, with DLY2 intervals inserted between each segment, and AI is used to collect responses to achieve frequency response analysis.
AM/FM signal simulation: By using an external reference input modulation signal and combining it with an internal DAC output carrier, it directly generates amplitude modulation or frequency modulation signals for communication equipment testing.
