ABB DS201 - DS202C New residual current circuit-breakers with overcurrent protection (RCBOs)

Any earth fault can be immediately identified through the blue indicator, that signals the differential tripping and which cannot be activated in case of manual operation on the toggle. 

This prevents any misinterpretations of the device and system status.

Label carrier for clear and reliable identification Increasingly complex systems require easier identification of the sections corresponding to each single circuit-breaker installed in the switchboard. 

With the practical label carrier fitted in the new circuit breakers you can give maximum visibility to the information relating to the protected loads.

Standardized accessories for the whole range

The DS201 and DS202C series share the wide range of accessories available, such as signalling contacts, auxiliary contacts, shunt trips, undervoltage releases, plug-in base 

and motor device, with the whole range of System pro M compact®

Small size for great usability

The DS202C series (the letter C stands for “compact”) has two poles protected in only 2 modules and breaking capacity (Icn) up to 10 kA. The new range can meet every market requirements for this kind of devices, reducing the space needed in the switchboards