SIGMATEK AKM54L-ANC2GBB0 3.83kW PM Servomotor with Neugart PLE160 Gearhead
Overview
The SIGMATEK AKM54L-ANC2GBB0 is a three phase permanent magnet servomotor rated at 3.83kW. It is supplied with a Neugart PLE160 gearhead for increased torque and reduced output speed. The motor uses permanent magnet technology to achieve high torque density and efficient operation. It is suitable for applications that require fast acceleration, accurate positioning, and smooth motion. The AKM54L-ANC2GBB0 is part of the SIGMATEK servo motor range and is intended for use with compatible servo drives. Its compact frame and integrated gearhead allow installation in machines where space is limited. The unit is built for continuous duty and reliable performance in demanding environments.
Motor Construction
The servomotor uses a robust housing that protects internal components from dust, moisture, and mechanical stress. The stator windings are insulated for the specified voltage and temperature rise. The rotor uses high energy permanent magnets to produce strong torque. Bearings are selected to handle radial and axial loads at high speed. The motor shaft is coupled to the Neugart PLE160 gearhead, which provides high torque density and low backlash. The gearhead is lubricated for long service life. The encoder interface provides position and speed feedback to the drive. Proper alignment and mounting are important for smooth operation and long service life.
Performance Characteristics
The 3.83kW rating allows the motor to drive medium to high load applications. Permanent magnet design provides high torque at low speed and good dynamic response. The motor can accelerate and decelerate quickly, which improves machine cycle time. Low rotor inertia helps the drive achieve fast settling and accurate positioning. The Neugart PLE160 gearhead multiplies output torque and reduces speed for applications requiring high force. The motor is designed to operate with minimal torque ripple, which supports smooth motion and reduced vibration. Thermal performance is managed through careful design of the windings and housing. The motor should be matched to a servo drive with the correct current and voltage ratings.
Feedback and Control
Servo motors require feedback for closed loop control. The AKM54L-ANC2GBB0 supports encoder feedback that provides position and speed data to the servo drive. The drive uses this data to adjust current and voltage in real time. This closed loop operation maintains accurate position and speed even under varying load. The motor may be used in position, speed, or torque control modes. It is suitable for multi axis systems where coordination is required. Signal wiring should be shielded to reduce electrical noise. Connectors should be seated correctly and checked during maintenance. Reliable feedback helps maintain machine accuracy and repeatability.
Applications
The SIGMATEK AKM54L-ANC2GBB0 with Neugart PLE160 gearhead is used in many automation applications. It can drive axes in packaging machines, printing presses, and textile equipment. It is also used in robotics, handling systems, and machine tools. In these applications, the motor provides precise motion for positioning, winding, feeding, and cutting. The gearhead increases torque for heavy loads. The motor can be combined with different gear ratios to match the application. For machine builders, the unit offers a compact solution for demanding motion tasks.
Installation and Maintenance
Installation should follow the manufacturer recommendations for mounting, alignment, and wiring. The motor and gearhead should be mounted securely to a rigid base. Misalignment with the driven load can cause vibration and premature bearing wear. Couplings should be selected to accommodate the torque and speed of the application. Fasteners should be tightened to the recommended torque. Electrical connections should follow applicable codes and drive requirements. After installation, the motor should be tested for smooth operation and correct feedback. Regular maintenance includes checking bearings, insulation, and cooling. The motor should be kept clean and protected from contamination.
Conclusion
The SIGMATEK AKM54L-ANC2GBB0 3.83kW PM Servomotor with Neugart PLE160 Gearhead is a high performance drive unit for precision motion control. It provides high torque density, fast dynamic response, and reliable operation. Its compact design and integrated gearhead make it suitable for a wide range of automation systems. Correct installation, proper drive tuning, and regular maintenance help ensure dependable service. For machine builders and maintenance teams, this servomotor is a practical choice for demanding industrial applications.
