Eaton XControl Modular PLC Complete Guide

Automatic logout after 15 minutes of inactivity

8.3 Main Configuration Page

Equipment configuration page

Equipment information display

Password change

USB interface activation

USB auto start

USB factory reset

Power Management (Restart/Shutdown)

Restore factory settings

Network configuration page

Static IP configuration

DHCP enabled/disabled

Host name setting

Update configuration page

Operating system update (. raucb file)

Guide loader update

progress display

Date/Time Configuration Page

Date and time setting

Timezone settings

NTP time synchronization

Remote access configuration page

SSH enable/disable

Chapter 9: PLC Shell Commands

9.1 Command Usage Method

In XSOFT-CODESYS-3:

Double click on "Device (XC xxx)" in the device tree

Select the 'PLC Shell' tab

Enter the command and press Enter to execute it

9.2 Common Commands

Command Description

Display a list of available commands

Applist displays a list of loaded applications

Canload displays CAN bus load

Caninfo displays CAN controller information

Getipconfig displays Ethernet configuration

Getrtc displays date and time

Plcload displays CPU system load (%)

Reboot the PLC

Setipadddr sets the IP address

Setrtc sets the date and time

Xngetversion displays XN driver version

Xnmodules displays configured and connected SDIAS modules

Chapter 10 Diagnosis and Troubleshooting

10.1 LED Status Indication

Meaning of LED color status

PLC green constant light running system has been started

Green flashing and communication with programming system

Red constant light running system error

PRG green constant light application running

Green flashing application stops

Red always on program error

SD green constant light detected MicroSD card

USB green constant light detected USB device

Green flashing to access storage devices

CAN1/CAN2 green flashing bus activity

Red flashing bus error

10.2 Common faults and solutions

Possible causes and solutions for the malfunction

PLC does not start and there is no 24VDC power supply. Check the power wiring

The PLC LED is always red and running. The operating system version suitable for running the system is installed incorrectly

PRG LED red constant on program error (watchdog, data access error) check program, view log file

Unable to connect XSOFT-CODESYS IP address error check network configuration, reset using web configuration tool

10.3 Diagnostic Information Acquisition

XN300 main station diagnosis

Online access devices

Select 'XN300_Saster'

Open the "XN300Master Parameters" tab

View error number and description

log file

Various log files can be downloaded through the "Logs" page of the web configuration tool.

Chapter 11 Maintenance and Disposal

11.1 Cleaning

Clean with a clean, soft, and slightly damp cloth

Stubborn stains can be sprayed with a small amount of cleaning agent on the cloth

Prohibit the use of sharp objects, corrosive cleaning agents, or solvents

11.2 Maintenance

The device can only be opened by the manufacturer or authorized repair center

Use the original packaging when sending for repair

Contact local suppliers or Eaton technical support

11.3 Storage and Transportation

Avoid UV and thermal radiation

Fluctuations in ambient temperature may cause condensation, so turn on the machine after it is completely dry

Transport in original packaging

11.4 Disposal

Abandoned equipment must be professionally disposed of in accordance with local regulations

Recyclable materials must comply with local recycling regulations

Can be returned to the manufacturer or sales point for environmental treatment

Chapter 12 Certification and Standards

12.1 Certification

Certification Instructions

CULus file number E205091 (TBD)

CE complies with all applicable EU directives

12.2 Applicable Standards

IEC/EN/DIN EN 61131-2: Programmable Logic Controller Standard

IEC/EN 60068-2-6: Vibration Testing

IEC/EN 60068-2-27: Impact testing

IEC/EN 61000-4-2: Electrostatic Discharge Immunity

IEC/EN 61000-4-3: Radio Frequency Electromagnetic Field Immunity

IEC/EN 61000-4-4: Electrical fast transient burst immunity

IEC/EN 61000-4-5: Surge Immunity

IEC/EN 61000-6-2: Industrial Environment Immunity