YOKOGAWA FCN/FCJ Autonomous Controller

• FTP client/server functionality:

transfer files to/from other networking systems

• PPP (Point to Point Protocol) functionality: exchange data with a PC or a cellular phone via the public network such as GPRS by connecting a modem to a serial port of FCN/FCJ

support the client mode and the server mode unsupport FCN-100’s serial port on one of duplexed CPU modules

SOFTWARE

FCN-100 and FCJ can simultaneously run IEC 61131-3-compliant control applications and Java applications.

Licenses

The following licenses are required to run an FCN-100 and FCJ.

FCN/FCJ Basic Software License

Available in two editions: License for single-CPU FCN-100 and FCJ, and license for duplexed-CPU FCN-100.

To use the FCN/FCJ Java functions, enable Java in the FCN/FCJ application software. (See *1 below)

For dual-redundant CPUs, FCN/FCJ Java functions cannot be used.

FCN/FCJ Application Portfolio License

To use application portfolios for FCNs/FCJs, respective portfolio licenses are required.

For details, see Application Portfolios for FCN/FCJ, GS 34P02P20-01E.

Logic Designer

Logic Designer is a tool program that runs on a computer and is used for developing control applications as tasks for an FCN/FCJ.

For details, see Logic Designer, GS 34P02Q01-01E.

FCN/FCJ Simulator

The simulator is designed to run control applications, which are created using the Logic Designer, on a general-purpose PC. This simulator enables users to debug control applications without using an FCN/FCJ.

Resource Configurator

Resource Configurator is a tool program that runs on a computer and is used for making basic settings in an FCN/FCJ, including:

• IP address settings

• I/O module settings

• License settings

• Initial communication settings

Note: Resource Configurator is included in the supplied media (DVD-ROM) containing the FCN/FCJ software, and does not require a license to run.

Application Portfolios

An Application Portfolio is a bundle of useful software parts for FCN/FCJ, such as those for advanced control. Application Portfolios are offered as:

For control logic:

PAS Portfolio

SAMA Portfolio

For communication:

FA-M3 Communication Portfolio

MELSEC Communication Portfolio

SYSMAC Communication Portfolio

Modbus Communication Portfolio

DNP3 Communication Portfolio

Temperature Controller Communication Portfolio and many more multifunctional portfolios. For details, see Application Portfolios, GS 34P02P20-01E.

FCN/FCJ Java Application Development Kit

The FCN/FCJ Java Application Development Kit is software for developing Java software applications which run on the FCN-100 or FCJ. For more details, refer to FCN/FCJ Java Application Development Kit, GS 34P02Q76-01E.

InfoWell

InfoWell is designed to transfer control application data from FCN/FCJ via web screens or e-mail. This package does not require programming and enables data transfer via web screens or e-mail by simple settings. For details, see InfoWell, GS 34P02P51-01E.

l FCN/FCJ IT Security Tool

This IT Security Tool sets IT security compliant with other Yokogawa system products security policy. FCN/FCJ engineering tools support IT security.

Note: The IT Security is not available either for Domain Management or for Combination Management in CENTUM VP.

Counter Measure against Wide Area Network connection

It is necessary to install VPN and/or firewall as a counter measure against network risk from Wide Area Network connection. For details, refer to STARDOM Network Configuration Guide, TI 34P02K25-01E.