Zygo 3D Optical Profiler
来源:
|
作者:FAN
|
发布时间 :2025-10-28
|
11 次浏览:
|
Share:
Nexview 3D optical surface profiler excels at measuring all surfaces from supersmooth to very rough, with sub-nanometer precision, independent of field of view.
Measurement types include flatness, roughness, large steps and segments, thin films,and steep slopes, with feature heights ranging from < 1 nm up to 20000 µm.
inspector 2, to bring up a red and a blue vertical line on the line profile.
4. Use the mouse to move the red and blue vertical lines to measure the height difference in between the two horizontal dotted lines.
The results are displayed on the right side of this profile as shown in Figure 9.
5. To save line profile, right click it and select Export. To save 3D image, click Save Data on the top-right corner.
6. After finishing all measurements, close Mx, without saving the application. Raise the microscope to remove your sample.
7. Logout in FOM.
