Welcome to the Industrial Automation website!

NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Problems in the utilization of sewage resources

F: | Au:佚名 | DA:2024-01-08 | 765 Br: | 🔊 点击朗读正文 ❚❚ | Share:

The national level has attached great importance to water pollution control, sewage treatment technology has developed rapidly and achieved remarkable results, but the resource utilization of sewage is still in the preliminary stage, the development is not sufficient, and the utilization level is low. At present, the discharge of urban sewage is about 75 billion m³, and the amount of renewable water conservancy is less than 10 billion m³, which needs to be accelerated. Most coal chemical enterprises are built in water-scarce areas, and the resource utilization of industrial wastewater can minimize the shortage of water resources. At present, the main problems of sewage resource utilization are as follows:

1. Policies, regulations, management mechanisms and standard systems are not sound

At the national level, there are many laws and regulations on the policy of sewage resource utilization, but the connection of laws and regulations is not good, lack of coordination, and short board. The policies, planning, supervision and management of the relevant departments of the government lack coherence. There is a lack of coordination in sewage collection and recycling treatment, and some industrial wastewater is mixed into urban sewage systems, increasing the environmental risks of recycled water and sludge utilization. The problem is mainly reflected in the following aspects: First, the incentive mechanism and supervision system are not perfect, and the lack of reasonable charges and incentive mechanisms has led to the low enthusiasm of enterprises for regenerating water with thousands of ecological environment. Second, the lack of sewage resource utilization target determination mechanism, supervision and management system is not perfect, resulting in planning goals difficult to achieve. Third, the standard system is not perfect, the coverage of reclaimed water utilization water quality standard is not comprehensive, and the water quality classification standard is missing; The discharge standard of sewage treatment plant, water environment quality standard and water quality standard of reclaimed water ecological environment utilization lack coordination and coordination; Lack of sewage resource utilization benefit evaluation standards, ecological environmental risk management standards, technical standards, equipment standards and service and supervision standards.

2. The planning of reclaimed water utilization and the construction of facilities are not coordinated

The recycled water utilization plan lacks binding force, and the types of industrial projects introduced in the park often exceed the planning scope, affecting the normal operation of sewage treatment facilities. The positioning of industrial agglomeration area often changes with the situation of economic development, and the way out of "three wastes" is rarely considered from the perspective of the complementarity of circular economy and technological economy. Changes in the introduction of industrial projects have made it difficult for the centralized wastewater treatment facilities built according to the original plan to operate normally, and some even cannot operate normally. For the coal chemical industry and coal mine water problems, the more prominent is that the coupling degree is not enough, the distance is far, it belongs to thousands of different owner units, coordination is difficult, and the displacement and resource utilization are also difficult to match.

3. The theoretical research of sewage resource utilization is insufficient and the scientific and technological support is not strong

The research on the risk and control of sewage resource utilization is insufficient. The utilization of reclaimed water is a complex non-traditional water supply project. Compared with the standard discharge of sewage and traditional water supply, the risk factors, exposure pathways, exposure amounts and risk generation mechanisms need to be studied in a targeted and systematic way. There are some problems such as low efficiency of wastewater recycling treatment process, immature energy and resource conversion technology and lack of original technology.

4. The design of sewage treatment plant in industrial agglomeration area does not match the needs of enterprises in the park

The design and construction standard of sewage treatment plant in industrial agglomeration area can not meet the requirements of wastewater treatment in industrial park. In the construction of sewage treatment plants in many industrial agglomeration areas, the feasibility of industrial wastewater treatment and discharge up to standard is not demonstrated from a technical point of view, but the design idea of urban sewage treatment plant is adopted for construction, and the pollution control idea is rarely proposed from the characteristic pollutants of industrial wastewater, and the lack of pretreatment links and wastewater quality control means. Due to the lack of detailed provisions on toxic and harmful substances, especially organic poisons, in policies, regulations and related discharge indicators, and the lack of binding indicators on takeover conditions, many enterprises have blindly adopted various means, even adding water dilution, and pursued the "standard discharge" of wastewater indicators (especially COD). As a result, organic pollutants with biological toxicity, biological inhibition and difficult biodegradation in wastewater enter the park centralized sewage treatment plant without effective control. Some enterprises discharge wastewater with high biodegradability, which promotes the stable operation of the wastewater treatment plant in the industrial agglomeration area. However, in order to meet the unified take-over standards, biochemical pretreatment facilities have been built to remove useful components such as carbon sources, which is not conducive to the normal operation of the wastewater treatment plant in the park and the overall energy saving and emission reduction.

  • Omron NS5-MQ00B-V2 Touch Screen HMI
  • Siemens 6DP1280-8AB SIMADYN D Control Module
  • Schneider HJA36060U43X PowerPact H Breaker
  • WITTENSTEIN LP120X-MF2-50-1I1-3X-SPE Planetary Gear
  • Omron G9SX-GS226-T15-RT Safety Guard Relay
  • Omron CPM1A-40CDT1-D-V1 Programmable Controller
  • ABB ACH550-01-05A4-4 HVAC Drive 2.2kW
  • Schneider TSXDMZ28DT Modicon TSX Micro I/O Module
  • Siemens 6DL1131-6BH00-0EH1 ET200SP HA DI Module
  • B&R X20IF10E3-1 PROFINET IO Interface Module
  • Siemens QBE3000-D4 Transmitter
  • Inovance H3U-3624MT PLC Controller
  • Inovance AM600-CPU1608TP PLC Module
  • Omron NS8-TV00B-V2 NS8-TV00B-ECV2 HMI
  • Phoenix ILC 151 ETH PLC Module
  • National Instruments NI-9242 Analog Input Module
  • Fanuc A16B-3200-0521 Main Board
  • NLT NL8060BC26-35F 10.4 LCD Screen
  • Pilz PSEN cs1.1P 540050 Safety Switch
  • Keyence VT-SW4 VT-7SR Touch Panel
  • Siemens 6ES7 131-1BL11-0XB0 Digital Input Module
  • Mitsubishi RJ71EIP91 Ethernet IP Module
  • Siemens 3RW4047-1BB14 Soft Starter 55kW
  • Mitsubishi AJ71C21-A PLC Programmable Controller
  • NL8060BC21-06 8.4 Inch LCD Module
  • Siemens 6ES7215-1HG40-0XB0 PLC S7-1200
  • Siemens 3VA2463-5HL32-0AA0 630A Breaker
  • Saginomiya E-UJ-44030-B Control Board
  • Schmersal MV10H330-11y-M20-1348 Safety Switch
  • Fanuc A16B-1211-0301-04A Control Board
  • Siemens 6SN1123-1AB00-0AA2 LT Module
  • A100005506 Compair Delcos 3100 Control Panel
  • Omron ZFV-CA40 Smart Sensor Amplifier
  • Fanuc A16B-2200-0660 I O Board
  • Omron CJ1W-NC471 Position Control Unit
  • Siemens 6SN1112-1AA00-0AA0 Simodrive PWM Module
  • Mitsubishi GT2708 HMI Touch Panel
  • Siemens 3TK2834-1BB40 Safety Switch
  • INSYS EBW-E100 Industrial Ethernet Router
  • Schneider LC1F400 Contactor TeSys F
  • Mitsui RYP-51 PCB Control Board
  • Tamagawa TS2620N941E172 Encoder
  • Pilz PZE 9 Safety Relay
  • Omron C1000H-CPU01-V1 PLC
  • Siemens 6SL3210-1KE21-3UP1 Frequency Converter
  • Allen-Bradley 440E-L22BNSM Rope Pull Switch
  • ABB CI868K01 Interface Module
  • Stein Sohn E 083.1 PLC Rack
  • Mitsubishi GT2508-VTBD GT2508-VTBA HMI
  • ABB 3BSE018161R1 Module
  • CAREL ASD100 PGD1AY0I00 Operation Panel
  • ABB EK370-40-11 Contactor 220-230V
  • Eaton 9PX1500IRTM UPS 1500VA
  • NCV-20NGNMP Programmable Controller
  • Mitsubishi LE-40MTA-E Tension Controller
  • Fanuc A16B-3200-0429 Control Board
  • Mitsubishi GT2310-VTBA HMI Touch Screen
  • 3A99184G 1C31170G PCB Module Rev 10
  • Schneider 140NOM25200 Modicon Quantum Adapter
  • Mitsubishi NV400-SW 400A Circuit Breaker
  • Applied Materials 0190-51102 Heater Controller
  • Omron C200H-DA003 Analog Output Module
  • Yaskawa JANCD-YCP21-E DX200 CPU Board
  • IAI 12G2-60-250-P-L-C1-SP Intelligent Actuator
  • NLT NL8060BC21-11 8.4 LCD Screen
  • Omron NX502-1300 Controller Unit
  • ABB RVT-6 Power Factor Controller
  • Schneider TM258LF66DT4L PLC Controller
  • NLT NL6448BC26-27D 8.4 LCD Panel
  • NLT NL8060BC21-09 8.4 LCD Screen
  • Keyence XG-8700L Multi-camera Imaging System
  • EPC 50 3183045486 I O Motherboard
  • Nidec Emerson M701-054-00270A CT Drive
  • Therma Wave 18-011040 Controller Assembly
  • Mitsubishi Q03UDECPU PLC CPU Module
  • Allen-Bradley 2002-NX70-MWLINK PLC Module
  • AS-2P-60M-B Industrial PLC Cable
  • Yaskawa JANCD-YCP21-E DX200 CPU Board
  • PASABAN MC-2006 03 CAN PLC Card
  • Mitsubishi RJ71PB91V PROFIBUS DP Module
  • Fanuc A20B-8100-0137 PCB I O Board
  • D0-06DD2-D PLC Module DL06 PLC
  • Kepco BOP100-4M Power Supply Amplifier
  • Allen-Bradley 1785-L60B PLC-5 60 Module
  • Siemens 7MH4900-3AA01 Weighing Module
  • Pilz 773100 PNOZ m1p Safety Controller
  • Omron NS12-TS00B-V2 Graphic Operation Panel
  • EC20-4040BTA Programmable Controller PLC
  • Fanuc A16B-1212-0100-01 Power Unit CNC
  • Siemens 6ES7151-3BB23-0AB0 ET200S Interface Module
  • ATTO Control DU-01 PLC Display System
  • Keyence KV-RC8BXR Programmable Controller
  • Lenze GST04-1GVCK-063C22 Servo Motor
  • CKD AX9000GH AX9210H Control Unit
  • ABB PG6310 DC Trigger Control Board
  • Cutler Hammer 10316H621C Type L Device
  • TAIYO AA-277 EM CY TRIP PCB Card
  • Schneider BMXCPS2010 PLC Power Supply
  • Schneider TSXMRPC007M PLC PCMCIA Card
  • 101182218 Safety Stop Relay SSW301HV-230V
  • Cutler Hammer 9-1875-3 Size 6 Contactor 480V
  • Nidec UNI3401 Drive Module Control Board
  • Delta AS06XA-A PLC Module Analog Mixed IO
  • Lenze EPL 10201 13408978 Servo Drive 24V DC
  • Sigmatek CCP612-K PLC Module DI DO Module
  • Schneider ATS48D38Q Soft Starter Altistart 48
  • Fanuc A20B-3300-0472 Main CPU Board Series 30i
  • Mitsubishi A171SCPU-S3 Servo CPU Module PLC
  • ABB 1SFL597001R7011 700A 100-250V Soft Starter
  • Yaskawa JANCD-YCP21-E DX200 CPU Control Board
  • Schneider NS630N Circuit Breaker 3P 630A
  • Honeywell DPCB21010002 Rack Slot PCB
  • Mitsubishi RJ71EIP91 PLC Module
  • Siemens 3VL5763-1DC36-0AA0 Circuit Breaker
  • Siemens 6GK7542-1AX00-0XE0 Communication Module
  • Siemens 6SL3130-6AE15-0AB1 Smart Line Module
  • HMS Anybus AB7646-F Gateway
  • Honeywell 621-0020 Analog Input Module
  • Siemens 6ES7212-1HF40-0XB0 PLC Controller
  • MAK 1.00.7-36.21.00-40 PCB Module
  • ABB 3BSE006503R1 PFSA140 Power Supply
  • SAACKE F-GDSA 143303 Burner Controller
  • ABB PFSC230 25m Cable Set
  • GE HYDRAN 201Ci-1 Controller
  • ABB NINT-42C main circuit interface board
  • B&R 3AT660 6 Thermocouple Input Module
  • Honeywell EC7850A1080 Programmable Logic Controller
  • Mitsubishi A2ACPU21 CPU Module MELSEC A Series