Welcome to the Industrial Automation website!

NameDescriptionContent
HONG  KANG
E-mail  
Password  
  
Forgot password?
  Register
当前位置:

Research progress on hazards and treatment technology of mine wastewater

来源: | 作者:佚名 | 发布时间 :2024-01-08 | 655 次浏览: | Share:

Yang Chengsheng et al. studied the purification efficiency of constructed wetland system with broadleaf ctypha as the dominant species on wastewater from Fankou lead-zinc mine in Shaoguan City, Guangdong Province. The results showed that: After the treatment of constructed wetland system, the removal rates of COD, solid suspended matter, Ph, Zn, Cu and Cd in wastewater reached 92.19%, 99.62%, 93.98%, 97.02%, 96.87% and 96.39%, respectively, and the water quality was significantly improved. The contents of Cu and Cd reached the industrial standard and were close to the agricultural irrigation standard. Sardar Khan et al. studied the removal of heavy metal ions in industrial wastewater by constructed wetland method, and the test results showed that the method had a good removal effect on Cd, Fe, Cr and Cu in industrial wastewater, with removal rates of 91.9%, 74.1%, 89.0% and 48.3%, respectively.

2.5 Biological Method

Biological method can purify sewage through the interaction between biological organisms or their metabolites and metal ions, which has the advantages of low cost and environmental friendliness, and has become a research hotspot in various countries. Biological methods include biological adsorption method, sulfate reducing bacteria method and so on. Biosorption is the use of microorganisms (living, dead or their derivatives) to separate heavy metal ions from water systems. The mechanism of microbial separation of heavy metal ions from solution is divided into two situations: one is extracellular enrichment and extracellular precipitation, and the other is adsorption or complexation on the cell surface. The adsorption or complexation of the cell surface has no requirement on whether the microorganism is active, while the large concentration of intracellular and extracellular often requires the microorganism to be active. Sulfate Reducing Bacterial (SRB) is used to reduce S042- to H2S and further oxidize H2S to elemental S by biological oxidation. The method consists of three steps: First, SRB reduces S042- to sulfide, which can not only remove S042- in wastewater, but also increase the pH value of wastewater and reduce the harm of wastewater to the environment; Secondly, S2-1 produced in the reduction process reacts with heavy metal ions in the wastewater to generate heavy metal sulfide precipitation, which effectively removes heavy metal ions in the wastewater. Finally, H2S(S2-) is oxidized to elemental sulfur by biological oxidation. Biological treatment of mine wastewater has the advantages of low cost, easy management, strong applicability, no secondary pollution, recyclable metal resources, etc. Therefore, biological treatment has great potential in mine wastewater treatment. For example, Esteves et al. used modified sargasso as adsorbent to treat zinc-containing wastewater with a mass concentration of 98 mg/L, and the removal rate of zinc could reach 99.7%. From 1994 to 1998, funded by the US Environmental Protection Administration, SRB was used to treat and control the acid mine wastewater of Lily-Offenboi Mine. The semi-industrial test results showed that the removal rates of Zn, A1, Mn, Cd and Cu were 99%, 99%, 96%, 98% and 96%. Using maple sawdust and sawdust as organic carbon sources in the reactor, Carmen M. Neculita and Gerald J. Zury conducted an experimental study on the treatment of acid mine wastewater by SRB. The results showed that the concentration of SO42- in the wastewater could be reduced from 5500 mg /L to less than l m/L, Fe, M, Cd, Fe, Fe, Fe, Fe, CD, Fe, Fe, Fe, Fe, CD, and so on. The removal rates of Zn and Mn were above 91.8%. James M. Coastro et al. used the mixture of potato skins and manure from beef cattle factory As electron donor to conduct the biological treatment experiment of mine wastewater, which greatly improved the water quality of wastewater. The concentrations of S042-, Fe and AS decreased from 1200, 100 and 5 mg/L to near zero respectively, and the pH value increased to neutral.  The removal rates of Fe and Cu were both greater than 90%, and the concentration of S042-was also significantly reduced.

Three knots

At present, there are 5 methods to treat mine wastewater: acid-base neutralization method, coagulation sedimentation method, chemical oxidation method, constructed wetland method and biological method. Acid-base neutralization method and coagulation sedimentation method have the advantages of simple process, convenient operation and low operating cost, but there are also serious scaling, large amount of sediment, easy to cause secondary pollution and other disadvantages. The most significant feature of chemical oxidation method is that it is simple to operate and can effectively treat various forms of pollutants, but the treatment cost is high, so it is difficult to promote and apply in production practice. Constructed wetland method has the advantages of low investment, simple operation, strong impact resistance and low operating cost, but it covers a large area, is easily affected by the external environment, and has some limitations on some difficult to treat wastewater. As a new practical technology, the microbial method has the advantages of low cost, easy management, strong applicability, no secondary pollution, can recover the shortage of raw material elemental sulfur and some heavy metal ions such as copper, zinc, etc., and is increasingly used in wastewater treatment. However, how to maintain the activity of microorganisms at room temperature and how to eliminate the inhibition of heavy metal ions on microorganisms? And the mechanism of microbial action in wastewater treatment, etc., need to be further studied.

  • FOXBORO L0130AD L0130AE-0H Digital Input Module
  • FOXBORO 0399085B 0303440C+0303458A combination control module
  • FOXBORO SY-0399095E SY-0303451D+SY-0303460E DC power module
  • FOXBORO 0399071D 0303440C+0303443B Combination Control Board
  • FOXBORO RH924UQ controller module
  • FOXBORO E69F-TI2-S dual line temperature transmitter
  • FOXBORO 0399144 SY-0301059F SY-1025115C/SY-1025120E Combination Control Board
  • FOXBORO SY-60399001R SY-60301001RB SY-60702001RA/SY-61025006RA/SY-61025004RA/SY-61025001RA High performance industrial control module
  • FOXBORO 0399143 SY-0301060R SY-1025115C/SY-1025120E Sensor
  • FOXBORO 873EC-JIPFGZ Industrial Control Module
  • FOXBORO FBM230 P0926GU Communication Module
  • FOXBORO P0916PH P0916JS Input/Output Module
  • FOXBORO P0916PH P0916AL I/O module
  • FOXBORO 870ITEC-AYFNZ-7 Intelligent Electrochemical Transmitter
  • FOXBORO FBM207 P0914TD Voltage Monitor
  • FOXBORO FBM201D Discrete Input Module
  • FOXBORO P0923ZJ switch I/O interface module
  • FOXBORO P0923NG Intelligent Differential Pressure Transmitter
  • FOXBORO P0916KN power module
  • FOXBORO P0916KM I/A series module
  • FOXBORO P0916WE Terminal Cable
  • FOXBORO P0916VB power supply module
  • GE Hydran M2-X Transformer Condition Monitoring Device
  • FOXBORO P0916VL control module
  • FOXBORO P0916VC High Performance Terminal Cable
  • FOXBORO P0916WG system module
  • FOXBORO P0972ZQ interface channel isolation 8-input module
  • FOXBORO P0973BU high-frequency fiber optic jumper
  • FOXBORO P0926MX Splasher Confluencer
  • FOXBORO P0961S connector module
  • FOXBORO P0903NU system module
  • FOXBORO CM902WM control module
  • FOXBORO P0972VA ATS Processor Module
  • FOXBORO P0916Js digital input terminal module
  • FOXBORO PO961BC/CP40B control module
  • FOXBORO PO916JS Input/Output Module
  • FOXBORO PO911SM Compact Monitoring Module
  • FOXBORO P0972PP-NCNI Network Interface Module
  • FOXBORO P0971XU Control System Module
  • FOXBORO P0971DP Controller
  • FOXBORO P0970VB control module
  • FOXBORO P0970BP (internal) cable assembly
  • FOXBORO P0961EF-CP30B High Performance Digital Output Module
  • FOXBORO P0961CA fiber optic LAN module
  • FOXBORO P0926TM Modular I/O PLC Module
  • FOXBORO P0916BX series control system input/output module
  • FOXBORO P0916AG Compression Period Component
  • FOXBORO P0916AC I/A series module
  • FOXBORO P0912CB I/O Terminal Module
  • FOXBORO P0911VJ high-precision control module
  • FOXBORO P0911QC-C 8-channel isolated output module
  • FOXBORO P0911QB-C High Performance Industrial Module
  • FOXBORO P0903ZP Embedded System Debugging Module
  • FOXBORO P0903ZN control module
  • FOXBORO P0903ZL High Frequency Industrial Module
  • FOXBORO P0903ZE I/A series fieldbus isolation module
  • FOXBORO P0903NW Industrial Control Module
  • FOXBORO P0903NQ control module
  • FOXBORO P0903AA Industrial Control Module
  • FOXBORO FBM205 cable
  • FOXOBORO P0960HA I/A series gateway processor
  • FOXBORO P0926TP high-performance control module
  • FOXBORO P0926KL control module
  • FOXBORO P0926KK PLC system functional module
  • FOXBORO P0924AW wireless pressure transmitter
  • FOXBORO P0916NK differential pressure transmission cable
  • FOXBORO P0916JQ PLC module
  • FOXBORO P0916JP I/A series control module
  • FOXBORO P0916GG Digital Input Module
  • FOXBORO P0916DV I/A series digital input module
  • FOXBORO P0916DC Terminal Cable
  • FOXBORO P0916DB I/A series PLC module
  • FOXBORO P0914ZM recognition module
  • FOXBORO P0902YU control module
  • FOXBORO P0901XT Process Control Unit
  • FOXBORO P0800DV fieldbus extension cable
  • FOXBORO P0800DG Standard Communication Protocol Module
  • FOXBORO P0800DB Universal I/O Module
  • FOXBORO P0800DA Industrial Control Module
  • FOXBORO P0800CE control module
  • FOXBORO P0700TT Embedded System
  • FOXBORO P0500WX Control System Module
  • FOXBORO P0500RY Terminal Cable Assembly
  • FOXBORO P0500RU control module
  • FOXBORO P0500RG Terminal Cable
  • FOXBORO P0400ZG Node Bus NBI Interface Module
  • FOXBORO P0400GH fieldbus power module
  • FOXBORO FBM207B Voltage Monitoring/Contact Induction Input Module
  • FOXBORO FBM205 Input/Output Interface Module
  • FOXBORO FBM18 Industrial Controller Module
  • FOXBORO FBM12 Input/Output Module
  • FOXBORO FBM10 Modular Control System
  • FOXBORO FBM07 Analog/Digital Interface Module
  • FOXBORO FBM05 redundant analog input module
  • FOXBORO FBM02 thermocouple/MV input module
  • FOXBORO FBI10E fieldbus isolator
  • FOXBORO DNBT P0971WV Dual Node Bus Module
  • FOXBORO CP30 Control Processor
  • FOXBORO CM902WX Communication Processor
  • FOXBORO AD202MW Analog Output Module
  • FOXBORO 14A-FR Configuration and Process Integration Module
  • FOXOBORO 130K-N4-LLPF Controller
  • FUJI FVR004G5B-2 Variable Frequency Drive
  • FUJI FVR008E7S-2 High Efficiency Industrial Inverter
  • FUJI FVR008E7S-2UX AC driver module
  • FUJI RPXD2150-1T Voltage Regulator
  • FUJI NP1PU-048E Programmable Logic Control Module
  • FUJI NP1S-22 power module
  • FUJI NP1AYH4I-MR PLC module/rack
  • FUJI NP1BS-06/08 Programmable Controller
  • FUJI NP1X3206-A Digital Input Module
  • FUJI NP1Y16R-08 Digital Output Module
  • FUJI NP1Y32T09P1 high-speed output module
  • FUJI NP1BS-08 Base Plate​
  • FUJI A50L-2001-0232 power module
  • FUJI A50L-001-0266 # N Programmable Logic Control Module
  • GE GALIL DMC9940 Advanced Motion Controller
  • GE DMC-9940 Industrial Motion Control Card
  • GE IS200AEADH4A 109W3660P001 Input Terminal Board
  • GE IC660HHM501 Portable Genius I/O Diagnostic Display
  • GE VMIVME 4140-000 Analog Output Board
  • GE VMIVME 2540-300 Intelligent Counter
  • GE F650NFLF2G5HIP6E repeater
  • GE QPJ-SBR-201 Circuit Breaker Module
  • GE IC200CHS022E Compact I/O Carrier Module
  • GE IC695PSD140A Input Power Module
  • GE IC695CHS016-CA Backboard
  • GE IC800SS1228R02-CE Motor Controller