Konica Minolta CM-3700A-U Plus spectrophotometer
来源:
|
作者:FAN
|
发布时间 :2025-09-20
|
311 次浏览:
|
Share:
Basic Equipment Information
(1) Equipment Introduction
CM-3700A-U Plus is a reflective high-precision fixed spectrophotometer developed specifically for measuring color and color difference in various industrial fields, meeting the high-precision requirements for color quality control in industrial production.
(2) Packaging and Protection
It is necessary to properly store all packaging materials (cardboard boxes, cushioning materials, plastic bags, etc.) used during equipment transportation. As the equipment is a precision measuring instrument, these materials are needed to reduce vibration and impact during subsequent maintenance and transportation; If the packaging materials are lost or damaged, please contact an authorized service agency.
When the equipment leaves the factory, the target mask is not installed at the target mask installation location, but a protective cover is installed to protect the sample measurement component (integrating ball opening). Before use, the protective cover must be removed, and during transportation, the protective cover must be installed. At the same time, the protective cover that comes with the equipment should be stored and used properly.
Attention: To check the measurement point, the device can be connected to a computer and the viewfinder function of SpectraMagic NX2 software can be used. The viewfinder has a pointer indicating the measurement point. If the pointer color is close to the sample color and difficult to see, it can be switched to an analog pointer.
Opacity measurement
When using the optional SpectraMagic NX2 color data software, calculate opacity based on two measurement results: white background and black background.