Signal contacts do not evaluate port link status and configure signal contact triggering conditions as needed (such as power failure, port disconnection, temperature exceeding limits, etc.)
The optical port speed is 100M, and the optical module defaults to full duplex. The gigabit optical module defaults to full duplex and has the same speed as the peer device to avoid negotiation failure
(3) Application scenarios of management functions
Basic configuration: Set IP address, subnet mask, gateway, VLAN, port rate and other basic parameters through web or HiView software.
Batch configuration: Use ACA22 adapter with USB interface to automatically configure adapter, backup/load device configuration, and achieve batch deployment of multiple devices.
Network monitoring: Real time monitoring of device status, port traffic, and ring network status through Industrial HiVision software, setting alarm thresholds.
Troubleshooting: Connect to the terminal through the V.24 interface or diagnostic port, view system logs, and locate power supply, connection, or configuration faults.

Email:wang@kongjiangauto.com