How to install Hirschmann MS20/MS30 series industrial Ethernet switches?
来源:
|
作者:FAN
|
发布时间 :2025-12-31
|
8 次浏览:
|
Share:
The installation user manual for Hirschmann MS20/MS30 series industrial Ethernet switches (Release 14 03/2023 version) covers four major modules: equipment overview, safety specifications, installation process, basic configuration, maintenance, and technical parameters. It provides detailed instructions on the hardware composition of the equipment (basic module, media module, SFP transceiver, etc.), installation steps (DIN rail installation, wiring, DIP switch configuration), safety compliance requirements (ATEX, IECEx and other hazardous environment certifications), and technical parameters (power supply range of 18-60V DC, working temperature -40 ℃~+70 ℃, port type supporting 10/100/1000Mbit/s twisted pair/fiber ports). It also offers a global technical support channel to provide comprehensive guidance for equipment deployment and operation in industrial scenarios.
3. Configuration saving: 1. After completing basic configurations such as IP/ports; 2. Configure not to save through WEB "Basic Settings → Load/Save → Save to Device" or CLI command "Copy Running config startup config", which will be lost after power failure
4. Document retention: Archive and retain installation manuals, product codes, and IP configuration information for easy troubleshooting and maintenance in the future
