YASKAWA S-7 series linear servo

Prohibited from littering: Components containing permanent magnets and electronic components must be disposed of by professional environmental protection organizations to avoid environmental pollution.

Summary of Key Parameters (Core Commonly Used)

Parameter Category Parameter Name Typical Settings/Range Adjustment Scenarios

Motion parameter acceleration time (C1-01) 0.01-3600s: Prolonged if the startup impact is large, shortened if quick startup is required

The deceleration time of motion parameters (C1-02) is extended from 0.01 to 3600 years due to deceleration overvoltage, and can be shortened by combining with braking resistors

Protection parameter motor overload protection (L1-01) 1-6 levels, single motor drive selects 1-3 levels, multi motor drive selects 0 levels (disabled)

Sensor Parameters Polarity Sensor Mode (T1-01) 0-5 Induction Motor Select 0 (Rotation Tuning), PM Motor Select 4 (Rotation Tuning)

Cooling parameters: Water cooling flow threshold ≥ 4 liters/minute. Water cooling models require flow monitoring. If the threshold is lower, the machine will be shut down