XYCOM XVME-956 Optical Disc Module XVME956

The XVME-956 consists of two sets of carrier cards and the accompanying daughter modules with either a PC/XT or PC/AT interface. 

When the daughter modules are installed onto a carrier, the resulting module occupies a single double-high VMEbus card slot. 

The XVME-956 is designed to operate with Xycom's VMEbus PC/AT processor modules.

The XVME-956 provides the following features:

The XVME-956 consists of carrier cards which drive the PC/AT signals from the host XVME PC/AT,and expansion modules which provide the various PC/AT I/O functions, such as Ethernet, Solid State

Disk, Serial I/O, and SCSI. The carrier cards (XVME-956/1 and XVME-956/12) are made to be compatible with Xycom's line of VMEbus PC/AT products. The XVME-956/12 is for use with the Xycom XVME-PC/AT modules with PC/104 Expansion sites. 

Both the XVME-956/1 and 956/12 provide two expansion module sites and sit adjacent to the VMEbus PC/AT. 

The XVME-956/3 expansion kit provides the necessary standoffs and mating connectors for single module expansion on an XVME-PC/AT with an on-board PC/104 expansion site.

Two types of expansion modules are offered. 

Type B modules have industry standard PC/104 mechanical dimensions of 3.550" x 3.775". Each Type B module requires a separate Xycom front panel kit . Type A modules are 4.010" x 5.091" and are functionally the same as Type B modules but have an integral front panel. 

Type A modules do not require a front panel kit.

ARRIER CARD INSTALLATION

WARNING

Cards in the VMEbus Rack