Atlas Copco 49‑4100‑01C5L Power Supply (49410001C5L)

The Atlas Copco 49‑4100‑01C5L, also referenced as 49410001C5L, is a high‑efficiency power supply module designed to provide stable and clean DC voltage for industrial control systems, sensors, and actuators. This unit converts an AC input to a regulated 24 VDC output with a capacity suitable for powering multiple devices. It is a reliable and compact solution for cabinet‑mount applications, featuring comprehensive protection and a wide operating temperature range.

Electrical Specifications

• Input Voltage: 100‑240 VAC ±10%, 50‑60 Hz

• Output Voltage: 24 VDC ±2%

• Output Current: 5 A (120 W) continuous

• Efficiency: > 90% at nominal load

• Input Inrush Current: < 30 A peak

• Hold‑up Time: > 20 ms at full load

• Ripple & Noise: < 100 mV peak‑to‑peak

Protection Features

• Overload protection (current limiting, auto‑recovery)

• Short‑circuit protection (hiccup mode)

• Overvoltage protection (shutdown at > 28 V)

• Overtemperature protection (thermal shutdown)

• Input fuse (internal, user‑replaceable)

Mechanical and Environmental

• Housing: Metal enclosure, ventilated

• Mounting: DIN‑rail (TS35) or screw mount

• Dimensions: 130 x 95 x 40 mm (W x H x D)

• Weight: 0.6 kg

• Operating Temperature: -25 °C to +70 °C (derating above 55 °C)

• Storage Temperature: -40 °C to +85 °C

• Protection: IP20

• Cooling: Natural convection

Installation and Wiring

The unit is mounted on a standard DIN‑rail, with screw terminals for input (L, N, PE) and output (+V, -V). A green LED indicates normal operation; a red LED lights for fault conditions. A built‑in potentiometer allows output voltage fine‑tuning by ±10%.

Certifications

CE, UL 508, CSA C22.2, and EN 61000‑6‑2/‑4 compliant. Suitable for industrial environments.

Applications

This power supply is used to supply Atlas Copco controllers, I/O modules, sensors, and small actuators. It is a recommended accessory for Power Focus, Tensor, and Elektronikon systems where a standalone 24 VDC source is required.

Reliability

Electrolytic capacitors rated for 100,000 hours at 40 °C. MTBF > 100,000 hours.

Maintenance

Regularly check for dust accumulation on ventilation slots. The internal fuse is accessible for replacement if necessary.

Benefits

Provides clean, regulated power to ensure stable operation of sensitive electronics. Its compact size saves cabinet space, and the protection features prevent damage from faults.

Conclusion

The Atlas Copco 49‑4100‑01C5L power supply offers reliable, efficient, and safe DC power for industrial control systems, aligning with Atlas Copco’s standards for quality and durability.