Atlas Copco 8436180002 Replacement Filter Element
The Atlas Copco 8436180002 is a high‑performance replacement filter element designed for industrial compressed air systems. This component is used in Atlas Copco filter housings to remove solid particulates, oil aerosols, and condensed moisture from the air stream, delivering clean, dry air that meets the stringent quality standards required for pneumatic tools, instrumentation, packaging, and sensitive manufacturing processes.
The filter media comprises a multi‑layer borosilicate microfibre matrix that provides a filtration efficiency of 99.999% for particles down to 0.01 µm, with an oil carryover of less than 0.01 mg/m³. The element incorporates a hydrophilic coalescing layer to capture water droplets, which are then drained via an automatic float trap. The construction includes epoxy‑bonded end caps and a perforated inner core for mechanical stability under high differential pressure.
This element is rated for a maximum operating pressure of 16 bar and a flow capacity of up to 1000 m³/h (depending on housing). It is compatible with both mineral‑based and synthetic compressor lubricants. The replacement interval is typically 12‑18 months, depending on inlet air quality and operating conditions.
Technical Specifications
Product Type: Replacement Filter Element
Part Number: 8436180002
Filtration Grade: 0.01 µm (oil aerosol removal)
Oil Carryover: ≤ 0.01 mg/m³
Maximum Operating Pressure: 16 bar (232 psi)
Maximum Operating Temperature: 80°C (176°F)
Flow Capacity (at 7 bar): 850 m³/h
Differential Pressure (clean): < 0.2 bar
Maximum Differential Pressure: 1.0 bar
Media Material: Borosilicate microfibre with hydrophobic layer
End Caps: Epoxy‑coated steel
Seals: Nitrile rubber (NBR)
Dimensions: Outer diameter 120 mm, inner diameter 80 mm, length 380 mm
Weight: 2.5 kg
Compliance: ISO 8573‑1:2010 (Class 1.2.1), RoHS
Key Features
High efficiency removal of oil aerosols and solid particles.
Low pressure drop reduces energy loss and operating costs.
Corrosion‑resistant materials ensure long service life.
Easy replacement without special tools.
Fully compatible with original Atlas Copco housings.
Deployment Scenarios
This element is used in Atlas Copco filter modules installed downstream of oil‑injected screw compressors, in central air distribution systems, and at point‑of‑use applications. Common industries include automotive painting, electronics assembly, food and beverage, and pharmaceutical manufacturing where ultra‑clean air is mandatory.
Installation and Maintenance
Installation involves removing the old element, cleaning the housing, and inserting the new element with correct orientation. A pressure differential indicator should be monitored; replace when differential reaches 0.7 bar or at scheduled intervals.
Compliance
Meets ISO 8573‑1 Class 1 for solid particulates and oil content, and is approved for use in food‑grade applications (FDA compliant).
Conclusion
The Atlas Copco 8436180002 filter element delivers superior air purity, reliability, and economy, making it the ideal choice for maintaining the cleanliness of compressed air systems in a wide range of industrial settings.
