Maintenance plan and safety precautions
1. Regular inspection items
Every 24 hours: Check the oil pressure (if there is a hydraulic circuit), noise, and vibration levels.
Every 720 hours: Check for external seal leaks, oil level, and oil filter contamination indicators.
Every 2000-4000 hours: Check the torque of all fastening bolts, wear of coupling elastic components, and re lubrication of Drywell seals.
Every time the oil is changed: check the alignment status between the gearbox and the coupling equipment.
2. Safety Warning
Before all maintenance work, the power must be cut off and ensure that it is not accidentally powered on, while taking measures to prevent the suspended load from accidentally moving.
When maintaining in potentially explosive environments, it is also necessary to eliminate residual gases or dust in the environment.
Original spare parts must be used during maintenance. Non original parts not only void the warranty, but may also endanger equipment safety.
The disassembled threaded connection must be reapplied with Loctite 510 or equivalent product.
When replacing the seal, a small amount of fluorocarbon grease (such as Fluorocarbon gel 880 ITP) should be applied to the sealing lip.
