Bonfiglioli 2E130136140005 Assembly Reference

The Bonfiglioli 2E130136140005 Assembly Reference identifies a component or assembly intended for compatible drive systems. It is identified by the reference 2E130136140005. Reference numbers of this type are often associated with specific mechanical or electrical assemblies, so the project documentation and the machine bill of materials should be treated as the primary source for its exact configuration.

An assembly reference should be integrated with attention to its fit, function, and interaction with the surrounding drive components. Mounting, alignment, electrical connection, and environmental conditions all affect performance. The 2E130136140005 should therefore be reviewed against the machine drawings before installation.

Function and Context

The 2E130136140005 reference is used to identify a specific assembly within a compatible drive arrangement. The exact function depends on the application and the surrounding components. The user should confirm the mechanical and electrical characteristics, the interface details, and any specific installation requirements from the project documentation.

The assembly should not be exposed to loads or conditions beyond those defined for the application. Misalignment, contamination, and incorrect handling can affect the service life of mechanical and electrical components. The machine design should provide adequate support and protection.

Reference Verification

The reference 2E130136140005 should be checked against the project documentation and the machine bill of materials. Reference based components can be configured for specific applications, so the reference alone may not describe every detail. The user should confirm the interfaces, dimensions, and connection points.

If the assembly is part of an existing machine, the original mounting position and the surrounding components should be reviewed before replacement. A component that fits mechanically may still differ in internal configuration.

Installation Planning

Installation should be planned before work begins. The mounting location, access for tools, cable routing, and clearance for service should be reviewed. The assembly should be mounted on a stable structure that can support the applied loads. Fasteners should be tightened to the specified values.

Alignment should be checked where the assembly connects to a shaft or coupling. Belt, chain, or gear connections should follow the machine design. Impact on shafts and precision surfaces during installation should be avoided.

Electrical and Signal Connections

Where the assembly includes electrical or signal connections, wiring should follow the connection diagram. Supply voltage, signal level, and terminal assignment must match the documentation. Cables should be routed away from high noise sources where possible.

Connectors should be fully engaged and secured. Cable strain relief should be provided. Protective earth should be connected according to the installation requirements where applicable.

Commissioning

Commissioning should begin with a visual inspection. Mounting, connections, and guards should be checked. The assembly should be tested at low load where possible, and the user should observe noise, vibration, temperature, and any electrical values relevant to the application.

Any unusual behavior should be investigated before normal operation. Commissioning records should include the reference, mounting position, connection details, and test results.

Maintenance and Troubleshooting

Routine maintenance should include inspection of mounting, connections, and the surrounding components. Dust and contamination should be removed according to site policy. Loose fasteners and damaged cables should be corrected.

If an issue appears, the user should check the mounting, alignment, connections, and the surrounding drive components. The cause should be identified before parts are replaced.

Documentation Practice

Clear documentation supports reliable service. The reference, installation date, and any replaced parts should be recorded. Drawings should be updated when changes are made. This helps future maintenance and spare parts planning.

Application Value

The 2E130136140005 reference supports the identification and integration of a specific assembly within compatible drive systems. Correct verification, installation, and maintenance help maintain reliable operation.

Summary

The Bonfiglioli 2E130136140005 Assembly Reference is intended for specific drive system requirements. Correct documentation review, fit verification, mounting, alignment, commissioning, and maintenance are essential.