IbaDeskline SAS Industrial Computer

Operating System and Software Installation

Installation method

The device provides two installation methods for the operating system:

Manual installation: Install the Windows operating system and various hardware drivers

Recovery DVD installation (recommended): Use the included recovery DVD to automatically complete system installation and configure all hardware drivers

Recovery DVD Installation Process

Set BIOS to boot from DVD

Insert the recovery DVD and restart the device

Press any key to start from DVD

Select the system language (supports English, French, German, Italian, Spanish, Russian)

For the Windows Server version, enter the product key (not required for Windows Embedded Standard 7)

Partition configuration (choose new disk installation, partition installation, or system replacement according to requirements)

The system automatically copies files and installs additional software

The device automatically restarts twice, and the entire process takes about 30-40 minutes

Important note:

The Windows Embedded Standard 7 license is bound to the hardware of the installation device and cannot be migrated to other computers

The recovery process is only conducted in English interface

Black or green screens may appear during the recovery process, which is a normal phenomenon

Subsequent Configuration

Windows Update: The automatic update function is turned off by default when the system leaves the factory. It is recommended to configure it according to the enterprise IT policy

Antivirus software: Antivirus software is not pre installed at the factory. It is recommended to install antivirus software that is uniformly used by the enterprise

IBA software installation: Refer to the accompanying IBA software manual for installation

Summary of Technical Specifications

Main Technical Parameters

Parameter specifications

Working temperature: 0 ° C to 55 ° C

Storage temperature -25 ° C to 70 ° C

Protection level IP20

Humidity level F (5% -95%, no condensation)

Cooling method: Fan cooling

Power supply (standard) 90 V to 264 V AC/110 V to 374 V DC, maximum 400 W

Power supply (RAID) 100 V to 240 V AC, dual redundant 500 W

Electronic Components and Interfaces

Component ibaDeskline SAS ibaDeskline SAS PCI

Processor Intel Xeon E3 Intel Core 2 Quad Q9400

Motherboard Supermicro X10SAT Supermicro C2SBC-Q

On board graphics card Intel P4600/P4700 Intel GMA 3100

Onboard network card 2 x Gigabit Ethernet 2 x Gigabit Ethernet

Memory 8 GB DDR3-RAM 8 GB DDR2-RAM

Expansion slots 1 x PCIe x16, 5 x PCIe 1 x PCIe x16, 1 x PCIe x4, 5 x PCI

USB interface 2 x rear USB 2.0, 2 x top USB 2.0, 4 x rear USB 3.0, 1 x internal USB, 6 x rear USB 2.0, 4 x top USB 2.0, 1 x internal USB

Hard disk 1 x 300 GB SAS HDD (expandable) 1 x 300 GB SAS HDD (expandable)