Product Overview
The National Instruments SCXI-1126 is a frequency input module for SCXI signal conditioning systems. It provides eight isolated frequency input channels for measuring signals from sensors such as flow meters, tachometers, and pulse output devices. The module is designed for industrial measurement applications where frequency and pulse signals must be conditioned and acquired by a data acquisition system.
The SCXI-1126 is part of the NI SCXI platform, which provides modular signal conditioning for high channel count measurement systems. SCXI modules condition signals close to the sensors and route them to a DAQ device through the SCXI backplane.
Frequency and Pulse Measurement
The module measures the frequency of input signals and can also capture pulse counts and timing information depending on the system configuration. Engineers should confirm the supported frequency range, input thresholds, and measurement functions for the specific module configuration against the product documentation.
Frequency measurement is used in flow, rotation, and position applications where a sensor produces a pulse train proportional to the measured quantity. Accurate frequency measurement depends on signal quality and on proper input conditioning, so engineers should verify sensor output levels and cable arrangements.
Isolation and Signal Conditioning
The SCXI-1126 provides isolation between the input channels and the SCXI backplane, which helps protect the measurement system from ground loops and common mode voltages. Isolation is valuable in industrial installations where sensors may be at different ground potentials.
Input filtering and threshold settings help reject noise and provide reliable counting in electrically noisy environments. Engineers should verify that the input thresholds are compatible with the sensor output levels and that the filter settings match the expected signal frequency.
SCXI Integration
The SCXI-1126 installs in a compatible SCXI chassis and communicates with a DAQ device through the SCXI backplane. Engineers should confirm chassis compatibility and the supported DAQ devices for the planned system.
Module positions and channel mapping should be documented during commissioning. Consistent labeling helps during maintenance and troubleshooting. The SCXI platform supports high channel count systems where many sensors must be conditioned and acquired in one system.
Software and System Integration
The SCXI-1126 is supported by NI-DAQmx and related NI software for SCXI systems. Engineers can configure the module and acquire frequency data through LabVIEW, LabWindows/CVI, Measurement Studio, and other compatible development environments.
In a larger test system, the module can be combined with analog input, digital I/O, and other SCXI modules. This allows frequency, voltage, temperature, and digital signals to be acquired in one coordinated system. Documentation of channel assignments and scaling supports maintenance and replication.
Typical Applications
Flow meter and tachometer signal measurement
Rotation and position monitoring
Pulse output sensor acquisition
Industrial process monitoring
High channel count SCXI measurement systems
Test stands with frequency output sensors
The SCXI-1126 provides eight isolated frequency input channels for SCXI systems. Its isolation, signal conditioning, and SCXI integration make it suitable for frequency and pulse measurement applications in industrial and test environments.




