The National Instruments QNET-04838, part number 749838-01, is a mechatronic actuator board designed for use with the NI ELVIS II engineering laboratory platform. It provides a motor drive interface, encoder feedback, and experiment connections that allow students and instructors to explore control systems, mechatronics, and dynamic system behavior in a teaching laboratory.
Control systems education requires hardware that is safe, repeatable, and easy to connect to instrumentation. The QNET board addresses these requirements by combining a small actuator, feedback sensors, and interface circuitry in a single board that plugs into the ELVIS II platform. Students can implement control algorithms in software, apply them to the physical actuator, and observe the response through the platform instruments.
Actuator and Feedback Hardware
The board includes a motorized actuator with position feedback, allowing students to study open loop and closed loop behavior. The actuator can be commanded through the ELVIS II interface, and the response can be measured using the encoder and associated signals. Engineers and instructors should verify the actuator specifications, voltage limits, and mechanical travel before use.
Feedback signals are routed to the platform for acquisition and analysis. Understanding the relationship between command, actuator movement, and feedback is central to control education. Documentation of wiring and signal scaling helps students interpret results correctly.
NI ELVIS II Integration
The QNET board is designed to work with the NI ELVIS II platform, which provides power, measurement instruments, and a prototyping area. The board connects to the platform so that actuator commands and feedback signals can be controlled and observed from the same software environment used for other experiments.
Instructors should review the combination of ELVIS II instruments and QNET hardware for each exercise. The integration supports a workflow in which students configure the controller, run an experiment, and analyze the captured data without assembling a separate bench.
Teaching and Experiment Design
The board supports laboratory exercises in system modeling, PID control, position tracking, and frequency response. Students can compare simulated behavior with measured behavior and adjust controller parameters. Instructors can structure exercises from basic open loop characterization to more advanced closed loop design.
Safe operating limits should be defined for each exercise. Mechanical stops, command limits, and power limits help prevent damage during student experimentation. Documentation of expected behavior helps instructors identify incorrect setups.
Software and Data Analysis
Control algorithms are implemented in software running on the host computer, with the ELVIS II platform handling actuator commands and sensor acquisition. Students can record position, velocity, and control effort, then analyze the data to evaluate performance.
Data logging and plotting support comparison of experimental results with theoretical predictions. A clear record of controller gains and test conditions makes experiments reproducible.
Applications
The QNET-04838 is suited to control systems laboratories, mechatronics courses, dynamic systems education, and capstone projects. It supports hands on learning with a physical actuator and feedback loop.
Installation and Maintenance
Installation requires connecting the board to the ELVIS II platform, verifying power and signal connections, and confirming that the actuator moves within its limits. The board should be mounted securely and protected from mechanical damage.
Maintenance includes checking connectors, verifying encoder feedback, and reviewing software configuration. Documentation of experiment settings helps maintain repeatability across course sections.
Summary
The National Instruments QNET-04838 Mechatronic Actuator Board provides a physical actuator and feedback interface for the NI ELVIS II platform. It supports control systems education, mechatronics laboratories, and hands on experimentation. The board is a practical teaching tool for instructors who want students to connect control theory with physical system behavior.




