Product Overview
The National Instruments SCXI-1120 is an isolated amplifier module for SCXI signal conditioning systems. It provides eight input channels with isolation, programmable gain, and filtering, allowing low level sensor signals to be conditioned before they reach a data acquisition device. The module is used in industrial and laboratory measurement systems that require accurate acquisition of small signals in electrically noisy environments.
The SCXI-1120 is part of the NI SCXI platform, which provides modular signal conditioning for high channel count measurement systems. SCXI modules condition signals close to the sensors and route them to a DAQ device through the SCXI backplane. This architecture reduces noise pickup and simplifies wiring in large systems.
Isolation and Signal Conditioning
The module provides isolation between the input channels and the SCXI backplane. Isolation helps protect the measurement system from ground loops and common mode voltages that can occur when sensors are mounted on equipment at different ground potentials. This is important in industrial installations where motors, drives, and other electrical equipment are present.
Programmable gain allows small sensor signals to be amplified before digitization, which improves the effective resolution of the measurement. Input filtering reduces noise and helps reject interference from nearby equipment. Engineers should select gain and filter settings that match the signal amplitude and frequency content of the measurement.
Eight Channel Configuration
The SCXI-1120 provides eight input channels, which can be used for a variety of sensor types including thermocouples, strain gauges with external completion, pressure transducers, and other low level voltage sources. Engineers should confirm the supported input ranges, gain settings, and filter options for the module configuration against the product documentation.
Channel mapping and configuration should be documented during commissioning. Consistent labeling of field wiring and channel assignments helps during maintenance and troubleshooting. In systems with many SCXI modules, a clear module map simplifies service and expansion.
SCXI Integration
The SCXI-1120 installs in a compatible SCXI chassis and communicates with a DAQ device through the SCXI backplane. Engineers should confirm chassis compatibility and the supported DAQ devices for the planned system. The chassis provides power, cooling, and backplane communication for the installed modules.
SCXI systems are often used in high channel count applications where signal conditioning is distributed close to the sensors. The SCXI-1120 can be combined with other SCXI modules for voltage, temperature, and digital signals, allowing a single system to handle many sensor types.
Software and System Integration
The SCXI-1120 is supported by NI-DAQmx and related NI software for SCXI systems. Engineers can configure gain, filtering, and channel settings through LabVIEW, LabWindows/CVI, Measurement Studio, and other compatible development environments.
Data from the module can be scaled, logged, and analyzed in the same application that controls other instruments and DAQ devices. Documentation of module configuration, gain settings, and channel assignments supports maintenance and replication across stations.
Installation and Wiring Practice
Proper wiring practice is important for low level measurements. Shielded cable, twisted pair wiring, and separation from power conductors help reduce noise pickup. Engineers should follow the module and chassis documentation for shield termination and grounding.
The SCXI chassis should be installed where the operating temperature range is respected and where airflow is adequate. Cable routing and strain relief should protect connectors and reduce intermittent faults on vibrating machinery.
Typical Applications
Low level sensor measurement in industrial systems
Thermocouple and bridge sensor acquisition
High channel count SCXI measurement systems
Noisy environments requiring isolated inputs
Laboratory and test stand data acquisition
Legacy SCXI system expansion
The SCXI-1120 provides eight isolated amplifier channels with programmable gain and filtering for SCXI systems. Its isolation and signal conditioning make it suitable for accurate low level measurement in industrial and laboratory applications.




