A-B Ultra3000 and Ultra5000 with DeviceNet

The Ultra3000 is an easy-to-use, high-performance, digital servo drive in a compact package.  

Reduced size, high performance and low cost make the Ultra3000 an attractive solution for a wide variety of applications.  

It is ideal for stepper, stand-alone indexing, or standard velocity or position control.  

With DeviceNet, users can dynamically adjust and change Ultra3000 commands from a PLC or Operator Interface.  

The Indexing option combined with DeviceNet allows the end user to perform complete motion profiles over DeviceNet.  

DeviceNet communication also provides Ultra3000 system diagnostics at the system controller.

The Ultra5000 is tailored for high-speed motion processing, position capture, and advanced math capabilities to increase application performance. 

When communicating over the DeviceNet network, the Ultra5000 user program can dynamically adjust to changing commands and parameters from a supervisory PLC or Operator Interface. 

Multiple Ultra5000 Drives can be networked with a single PanelView Operator Interface for a cost-effective application solution.

Precautions

Safety specifications are generally applicable to control system handling. Instructions and warnings related to a specific subject or operation of the product.

The following norms must be strictly observed:

  must strictly comply with the technical specifications and typical applications of the product system

  Personnel training: Only trained personnel shall install, operate, maintain or repair the product system. must

Provide guidance and explanation of the situation in danger areas to these personnel.

  Unauthorized changes: Changes or structural changes to the product system may not be made.

  Maintenance responsibility: Must ensure that the product system is used only under appropriate conditions and in full fitness for use.

 Working environment: The user must meet the specified environmental conditions:

Safety regulation

The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Verify that the installation is complete.

4 Ground and short-circuit the device.

Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must

Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.

Installation precautions

First, the importance of industrial equipment installation

In modern industrial production, various equipment and machines are widely used in various fields, such as manufacturing, energy industry, chemical industry and so on. The installation of industrial equipment is directly related to production efficiency and product quality. Proper installation and commissioning of good equipment can ensure the stable operation of the production line, improve production efficiency and product quality, reduce maintenance costs, and ensure the safety of employees.

Second, the steps of industrial equipment installation

1. Preparation: Before the installation of industrial equipment, it is necessary to carry out adequate preparation work. This includes the tools and equipment required for installation, cleaning and preparation of the installation site, and making installation plans and schedules.

2. Determine the installation position: Determine the installation position of the equipment according to the requirements of the equipment and the layout of the production line. When determining the location, the weight and size of the equipment need to be considered, as well as the coordination of the equipment with the surrounding environment.

3. Install the device: Assemble and install the device according to the installation instructions. Ensure that the device is securely and accurately connected, while protecting the appearance and internal components of the device.