BONFIGLIOLI 8E35020568-752623 230/480V 1.62/3.24A Motor

The Bonfiglioli 8E35020568-752623 motor is an industrial electric motor identified by the part number 8E35020568-752623 and rated for 230/480V with current values of 1.62/3.24A. It is intended for use in integrated drive systems where a reliable electric motor is required to power machinery through direct coupling or through a gearbox. The dual voltage rating allows the motor to be connected to different supply configurations, adding flexibility to system design and installation.

Product Overview

Industrial electric motors convert electrical energy into mechanical rotation. The Bonfiglioli 8E35020568-752623 motor is built for machine drive duties and is typically integrated with reducers, couplings, pulleys, or other transmission components. The motor assembly includes a stator, rotor, shaft, bearings, terminal box, and cooling provisions. The housing supports the internal components and provides mounting points for installation. The terminal box provides a safe connection point for the electrical supply and control wiring.

The dual voltage rating of 230/480V indicates that the motor can be connected for different supply voltages according to the terminal arrangement. The current values of 1.62/3.24A correspond to the two voltage connections. The nameplate should be consulted for exact ratings and connection details. Correct selection requires matching the motor to the load, supply, environment, and control method.

Construction and Design

The motor housing is designed to protect internal components and support the bearing assemblies. The stator windings are insulated to withstand the electrical stresses of industrial operation. The rotor is mounted on a shaft that is supported by bearings selected for the expected radial and axial loads. The shaft extension is machined to accept couplings, pulleys, or other driven components. The fan and fan cover provide cooling airflow over the housing during operation.

The terminal box allows the motor to be connected to the supply and control circuit. Electrical connections should be made according to the connection diagram and local regulations. The mounting arrangement may include feet, flanges, or other interfaces depending on the build. Proper mounting ensures that the motor remains aligned with the driven equipment and that vibration is controlled. Seals and bearing covers help protect the internal components from dust and moisture.

Performance Characteristics

The performance of the Bonfiglioli 8E35020568-752623 motor depends on its electrical design and the load connected to the shaft. Motor speed is primarily determined by the supply frequency and the number of poles. Torque is produced by the interaction between the stator field and the rotor current. The motor should be operated within its rated voltage, frequency, and duty cycle to maintain stable thermal performance. Starting current and starting torque should be considered when selecting protective devices and control equipment.

Efficiency and thermal behavior are important in continuous industrial operation. The cooling system must be able to remove heat generated by electrical and mechanical losses. Adequate ventilation around the motor helps maintain stable temperatures. The motor should be protected against overload, phase loss, and abnormal supply conditions using appropriate protective devices. When variable speed operation is required, the motor and drive should be selected together to ensure compatibility.

Applications

The motor is suitable for a wide range of industrial machinery when the nameplate ratings match the application. Typical uses include pumps, fans, conveyors, mixers, packaging equipment, and general machine drives. The motor may be used as a standalone drive or combined with a gearbox to achieve the required output speed and torque. In geared drive systems, the motor flange and shaft must match the gearbox input interface.

The operating environment should be considered when applying the motor. Dust, moisture, chemicals, and high ambient temperatures can affect insulation, bearings, and cooling. In such conditions, additional protection or a different motor configuration may be required. The motor should be installed in a location that allows inspection, maintenance, and adequate airflow. Correct alignment with the driven equipment helps reduce vibration and bearing load.

Installation Guidelines

Installation should begin with a check of the nameplate data and a visual inspection of the motor. The motor should be mounted on a rigid base that can withstand the torque reaction during operation. The shaft should be aligned with the driven equipment to avoid excessive radial and axial loads. Couplings should be fitted according to the manufacturer recommendations and checked for alignment. Mounting bolts should be tightened to the recommended torque.

Electrical connections should be made by qualified personnel following local regulations. The supply voltage and frequency must match the motor rating. The direction of rotation should be verified before connecting the load. Proper grounding is essential for safe operation. After installation, a short run without load helps confirm that the motor operates smoothly and without abnormal noise or vibration.

Maintenance Recommendations

Regular maintenance helps ensure reliable motor operation. The cooling fan and fan cover should be kept clean to maintain airflow. Bearing noise and vibration should be monitored. The motor insulation resistance can be measured periodically to detect deterioration. Electrical connections should be checked for tightness and signs of overheating. Any abnormal noise, smell, or temperature rise should be investigated promptly.

In environments with dust or moisture, additional protection measures may be needed. The motor should be kept clean and dry. Maintenance records help identify trends and support planned servicing. Following a consistent maintenance schedule reduces the risk of unexpected downtime and extends the operating life of the motor. When the motor is part of a geared drive, the gearbox maintenance schedule should also be followed.

Selection Considerations

When selecting the Bonfiglioli 8E35020568-752623 motor, engineers should confirm the supply voltage, frequency, phase, rated power, speed, frame size, mounting, and enclosure requirements. The motor must provide enough torque for the load under starting and running conditions. The duty cycle and ambient temperature affect thermal capacity. Protective devices should be selected to match the motor and load characteristics.

The motor interface must match the driven equipment or gearbox. Shaft dimensions, flange dimensions, and mounting holes should be checked. For variable speed applications, the motor should be compatible with the selected drive. Correct selection and installation help ensure dependable performance, stable thermal behavior, and long service life.

Conclusion

The Bonfiglioli 8E35020568-752623 motor is an industrial electric motor rated for 230/480V and 1.62/3.24A, designed for dependable drive performance in integrated machinery. Its construction supports reliable operation when matched to the correct supply, load, and environment. With proper installation and maintenance, the motor provides stable performance and long service life.