Bonfiglioli Vectron KP500 Keypad 179675500
The Bonfiglioli Vectron KP500 Keypad is a removable programming and display unit intended for compatible frequency inverters. It is identified by the KP500 model reference and the part number 179675500. The keypad provides local access to parameters, operating values, and diagnostic information, and it supports a parameter copy function for transferring settings between drives.
The KP500 is an accessory rather than a standalone drive. Its role is to support setup, commissioning, and maintenance of the parent inverter. The keypad should be handled with care and stored in a dry environment when not in use.
Role in Inverter Operation
The KP500 provides a local interface for parameter viewing and adjustment. It is used during commissioning to enter motor data and application settings, and during maintenance to read fault records and operating values. The exact menu structure and parameter set depend on the inverter series and firmware.
The keypad should not be used as the only means of parameter backup. Configuration records should also be kept externally so that settings can be restored if the keypad or drive is replaced.
Compatibility and Identification
The KP500 reference and the part number 179675500 should be checked against the inverter documentation. The keypad is associated with specific Bonfiglioli Vectron drive families. The user should confirm that the keypad is compatible with the drive model and firmware before use.
Similar keypads may exist for other drive platforms, so the part number should be verified. The keypad is a removable unit and should seat correctly in its connector.
Installation and Handling
The keypad should be installed according to the drive documentation. Power should be removed before connecting or disconnecting the keypad where required. The connector should be engaged fully and the keypad should be secured. The keypad should not be exposed to moisture, excessive heat, or mechanical shock.
The connecting cable, where used, should be routed away from power cables to reduce the risk of interference.
Parameter Management
The KP500 supports parameter access and, where provided, a copy function. The user should record the drive model, firmware version, and parameter set before making changes. Parameters should be changed in a controlled manner and the results documented.
When copying parameters between drives, the user should confirm that the source and target drives are compatible. Not all parameters may be transferable between different drive ratings or firmware versions.
Diagnostics and Maintenance
During maintenance, the keypad can be used to read fault codes and operating values. The fault record should be noted before resetting. The keypad display should be kept clean. If the keypad does not respond, the connector and the drive interface should be checked.
If the keypad must be replaced, the replacement unit should match the reference. The drive parameters should be verified after replacement.
Application Value
The KP500 keypad supports local setup, parameter management, and diagnostics for compatible Vectron drives. It is a practical accessory for commissioning and maintenance where a local interface is useful.
Summary
The Bonfiglioli Vectron KP500 Keypad 179675500 is a removable programming unit for compatible frequency inverters. Correct compatibility verification, careful handling, parameter documentation, and maintenance are essential.
