Mitsubishi A1S61PN Power Supply Unit for AnS Series PLC

The Mitsubishi A1S61PN is a dedicated power supply module designed for the AnS Series programmable logic controllers (PLC). It converts 100-240VAC input into a regulated 5VDC output with a rated current of 5A, providing reliable power to the PLC backplane and connected I/O modules.

Key Technical Features

• Universal AC input voltage range: 100 to 240VAC (50/60Hz)

• Rated output: 5VDC / 5A

• High efficiency switching regulator design

• Built-in overcurrent protection and overvoltage protection

• LED indicator for DC output status monitoring

• Compact form factor compatible with AnS Series rack systems

• Operating temperature range: 0 to 55°C

• Storage temperature: -20 to 75°C

• Humidity: 10 to 90% RH non-condensing

Electrical Specifications

Compatibility and Installation

The A1S61PN is part of Mitsubishi's AnS Series modular PLC system. It mounts directly to the AnS main base unit or extension base and supplies power to the CPU, I/O modules, and special function modules. The module features a front-accessible terminal block for AC input wiring and a grounding terminal for safety. Installation follows standard DIN rail or screw mounting procedures as outlined in the AnS Series hardware manual.

Protection and Safety

Overcurrent protection automatically shuts down the output if the load exceeds 5.5A, preventing damage to downstream components. Overvoltage protection clamps the output at approximately 6.2VDC. The unit complies with EN61000-6-2 (industrial immunity) and EN61000-6-4 (emission standards), and carries CE marking for use in industrial environments.

Typical Applications

Used in factory automation systems, machine control, packaging lines, material handling, and any MELSEC AnS based control cabinet requiring stable 5V power for logic circuits. The A1S61PN ensures long-term reliability with an MTBF exceeding 200,000 hours under normal operating conditions.

Physical Dimensions

Width: 55mm, Height: 100mm, Depth: 90mm (including connector). Weight approximately 0.45kg. The housing is flame-retardant plastic rated UL94V-0.

Ordering Information

Model: A1S61PN. Replacements or spares should be ordered using this exact part number. Always verify compatibility with your AnS Series base unit revision.