ABB ACS800-04/U4 driver module
来源:
|
作者:FAN
|
发布时间 :2025-07-02
|
245 次浏览:
|
Share:
ABB ACS800-04/U4 is a high-performance AC servo drive module designed specifically for the industrial automation field, with a power range covering 0.55 to 200 kW (0.75 to 200 hp), supporting precise control of three-phase AC motors (including permanent magnet synchronous motors). Its core adopts direct torque control (DTC) technology, which can monitor the motor status in real time and dynamically adjust the output, achieving high response speed and high-precision torque control, suitable for industrial scenarios that require efficient and reliable driving.
Maintenance and component replacement
Routine maintenance
Clean the heat sink every 6-12 months and check the fan's operating status annually (with a lifespan of approximately 6 years).
Capacitor replacement cycle: R4 and above frames take about 10 years and need to be reformed according to the manual.
component replacement
When replacing the fan, attention should be paid to model matching (such as the R2 frame fan requiring a flow rate of 35 m ³/h), and the functionality of the capacitor needs to be verified after replacement.
