Emerson DeltaV Bulk Power Supplies

VE5128 85-264V AC/108-375V DC, 43-67Hz 24V/40A, 960W (peak 1440W/4s) efficiency>93%, ripple<200mVpp, protection IP20

VE5137 85-264V AC/90-375V DC, 43-67Hz 12V/15A, 180W (peak 270W/4s) efficiency>86.5%, ripple<100mVpp, protection IP20

VE5122~VE5129 are the same as the corresponding models mentioned above, with the addition of a conforming coating, suitable for G3 corrosive environments

（2） AC-DC power module (IP67 protection model)

Model Input Specification (AC/DC) Output Specification (DC) Core Characteristics

VE5139 85-264V AC/100-353V DC, 50/60Hz 24V/3.8A, 100W IP66/67 protection, efficiency>80%, ripple<50mVpp, supports outdoor installation

VE5140 85-264V AC/100-353V DC, 50/60Hz 24V/7.6A (dual 3.8A), 2 × 100W IP66/67 protection, efficiency>85%, ripple<50mVpp, dual independent output

（3） Redundant module

Model Input Voltage Range (DC) Output Current Specification Core Characteristics

VE5134 10.8-30.8V DC 0-26A (continuous), 26-50A (5s) voltage drop 0.2V, no-load power consumption 0.5mW, supports 20A power redundancy

VE5135 10.8-30.8V DC 0-40A (continuous), 40-65A (5s) voltage drop 0.2V, no-load power consumption 0.5mW, supports 40A power redundancy

VE5136 10.8-30.8V DC 0-80A (continuous), 80-120A (5s) voltage drop 0.2V, no-load power consumption 1.18mW, supports 80A power redundancy

VE5131~VE5133 are the same as the corresponding models mentioned above, with the addition of a conforming coating, suitable for G3 corrosive environments

 Certification and Compliance

All regular models have passed the following certifications to ensure industry compliance:

Safety certification: UL 508, CSA C22.2 No.107.1 (industrial control equipment), UL 60950-1/CSA C22.2 No.60950-1 (ITE equipment), compliant with the Low Voltage Directive (IEC/EN60950-1).

Hazardous Area Certification: UL 60079-15/CSA E60079-15（Class I, Zone 2），ATEX II 3 G Ex ec nC IIC Gc，IECEx Ex ec nC IIC Gc，GOST Zone 2（ Russia).

Ship certification: ABS, DNV-GL, Lloyd's Register (LR), BV Type Approval, compliant with IACS E10 standard.

EMC compliance: Complies with EN 61326-1 (EMC) and EN 61010-1 (safety) to ensure resistance to electromagnetic interference in industrial environments.

Note: VE5139/VE5140 have no hazardous area and ship certification, and are only applicable to regular environments.

Ordering and matching

Model differentiation: Regular models and models with regular coatings are distinguished by suffixes (such as VE5138 for 5A regular and VE5122 for coating); The IP67 model is an independent series (VE5139/VE5140).

Installation accessories: Conventional models require T-shaped DIN rails, IP67 models require M4 screws (tightening torque 1N · m); All models of wiring must comply with terminal specifications (such as input/output terminals supporting 1.5-6mm ² wires, screw torque 4.4-15.6lb in)