Emerson DeltaV SD Plus Controller

Multi certification compliance: certified by CE (EMC complies with EN 61326-1:2006, LVD complies with EN 61010-1:2001) and CSA (CAN/CSA-C22.2 series standards); Compliant with NAMUR NE21 specifications; We have submitted certification applications for hazardous areas (ATEX/IECEx Zone 2, FM Class 1 Div 2) and ship applications (IACS E10, ABS, DNV, Lloyd's Register, etc.), and also support GOST Zone 2 hazardous area certification in Russia to meet the compliance requirements of different regions and industries.

Hardware specifications

Category specific parameters

Performance indicator - DST (Device Signal Label) upper limit: 750

-SCADA tags: 3200

-Maximum data transmission capacity: 2000 pieces/second

-Maximum received data volume: 250 pieces/second

-Maximum number of active client nodes: 64

-Module execution rate: 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 30s, 60s

-User memory: 48MB

Power and Protection - Power Supply: Powered by a dedicated system power supply through a Power/Controller carrier

-Internal fuse: 3.0A non replaceable fuse

-Power consumption: typical value of 5.0W, maximum value of 7.0W

Environmental parameters - Operating temperature: -40 ° C~70 ° C (-40 ° F~158 ° F)

-Storage temperature: -40 ° C~85 ° C (-40 ° F~185 ° F)

-Relative humidity: 5%~95% (without condensation)

-Air pollutants: Complies with ISA-S71.04-1985 G3 level and has a conformal coating

-Shock resistance (normal operation): 10g half sine wave, continuous for 11ms

-Vibration resistance (working limit): 1mm peak to peak value at 5Hz~16Hz, 0.5g at 16Hz~150Hz

LED indicator light - green (Power): indicates connection to DC power supply

-Red (Error): indicates the existence of an error state

-Green (Active): indicates that the controller is running as the main controller

-Green (Standby): indicates that the controller is running as a backup controller

-Yellow flashing (Pri. CN): indicates normal communication in the main control network

-Yellow flashing (Sec. CN): indicates that the backup control network communication is normal

External interface - Main control network: 8-pin RJ-45 connector

-Backup control network: 8-pin RJ-45 connector

Dimensions 16.2cm (width) x 4.18cm (height) x 19.93cm (depth) (6.38in x 1.65in x 7.85in)