Watlow EZ-ZONE ® PM PID controller

Watlow EZ-ZONE ®  PM PID controller

Product Overview

EZ-ZONE ®  The PM PID controller is a high-precision process control device launched by Watlow, which has multifunctional integrated features such as PID control and limit control, and is suitable for precise control of various process parameters such as temperature and pressure. The product complies with the ISO 9001 quality standard and has multiple international certifications such as UL, CSA, CE, etc. It supports AC (85-264VAC) or DC (12-40VDC) power supply and is suitable for the diverse needs of industrial scenarios.

Core advantages include TRU-TUNE+ ®  The adaptive tuning algorithm, 15A high ampere power output, parameter storage and recovery function, and NEMA 4X/IP65 protection level sealing design can operate stably in harsh environments such as dust and humidity, and are widely used in industrial heating, refrigeration, chemical and other fields.

Safety information and symbol description

（1） Definition of Security Level

NOTE: Provides key operational details to help optimize device performance.

CAUTION: Important information related to equipment protection and performance assurance must be strictly followed in accordance with operating procedures.

Warning: Key reminders related to personnel safety, equipment, and surrounding property protection that require high attention.

Electrical hazard symbol (lightning symbol within triangle): Indicates the risk of electric shock, and related operations must comply with electrical safety regulations.

（2） Meaning of core symbols

Symbol Explanation

-Warning/danger tips that need to be further explained in the user guide

-Static sensitive products require grounding and anti-static measures during installation or maintenance

-Double/reinforced insulation design to prevent electric shock risk

-Cannot be discarded at will, must be recycled according to regulations or consulted with the manufacturer for disposal

-The shell is made of polycarbonate material and requires standardized recycling or contacting the manufacturer for disposal

-Support AC or DC power supply

-Certified by UL, compliant with the US Canada process control equipment standards (UL 61010, CSA C22.2 No.61010)

-Certified by UL, suitable for Class I, Zone 2 hazardous environments (Groups A, B, C, D), in compliance with ANSI/ISA 12.12.01-2007 standard

-Compliant with EU directives, see conformity declaration for details

Installation and wiring

（1） Installation preparation

Process panel cutouts according to the size requirements of the corresponding model (1/32 DIN to 1/4 DIN), ensuring that the installation space meets the recommended spacing (such as the recommended panel spacing of 44.96-45.60mm for 1/8 DIN vertical type).

The panel thickness should be between 1.53-9.52mm to ensure a stable installation of the controller.

When installing, press the controller housing, slide the installation ring and tighten it. If NEMA 4X sealing effect is required, press the four corners of the installation ring alternately until it cannot shake.

（2） Wiring specifications

Before wiring, all power sources must be disconnected to avoid the risk of electric shock and follow NEC or local electrical standards.

Terminal wiring specifications: single wire 0.0507-3.30mm ² (12-30 AWG), or two 1.31mm ² (16 AWG) wires, with a tightening torque of 0.56 Nm (5.0 in lb).

Core terminal function:

Analog input terminal (Slot A): Supports thermocouples RTD、 Potentiometers and other inputs need to be wired correctly according to the type of sensor (such as the negative terminal of a thermocouple usually connected to the S1 terminal).

Power terminal (Slot C): Pin 98 is connected to the positive pole of AC/DC, and Pin 99 is connected to the negative pole of AC/DC.

Communication terminal: EIA-485 communication requires connecting T -/R - to terminal A and T+/R+to terminal B, using a daisy chain connection method, supporting up to 16 controllers in a network, with a maximum distance of 1200 meters.

（3） Environmental compatibility

Applicable media: acids, weak bases, alcohol, gamma rays, ultraviolet rays.

Avoid contact with strong alkalis, organic solvents, fuels, aromatic hydrocarbons, chlorinated hydrocarbons, etc.

Operation interface and navigation

（1） Key function

Key function

Adjust parameter values and switch menu options using the up/down keys; Long press for 3 seconds to enter the operation page, long press for 6 seconds to enter the settings page

Press the forward button (‰) to enter the submenu and confirm the selection; Long press for 6 seconds to enter the configuration file page

Infinite key (ˆ) returns to the previous menu; Long press for 2 seconds to return to the homepage; Clear Clearable Alarm/Error

（2） Core page navigation

Home: Default page for device power on, displaying process values (PV) and set values (SP), which can be directly adjusted.

Operation page: Press and hold the up/down keys for 3 seconds to enter, used for real-time monitoring (such as thermal power, cooling power) and temporary parameter adjustment (such as PID parameters, alarm status).

Settings page: Press and hold the up/down keys for 6 seconds to enter, used for basic configuration (such as sensor type, output mode, communication protocol).