KUKA Sunrise Cabinet Next Generation Small Control Cabinet

KUKA Sunrise Cabinet is a robot controller launched by KUKA for industrial applications, mainly used to operate KUKA axes, including industrial robots and mobile platforms. It adopts a 19 inch chassis structure, weighs about 23 kg, has a protection level of IP20, and an average noise of about 54 dB (A). The power supply is 110 V/230 V AC single-phase, with an allowable deviation of ± 10%, frequency of 50 Hz ± 1 Hz or 60 Hz ± 1 Hz, rated power of about 1 kVA, heat dissipation of about 370 W, and recommended 2x15 A slow melting protection on the power supply side. The control cabinet must be connected to a power system with a grounded neutral point. The operating environment temperature ranges from 5 ° C to 45 ° C, and the storage and transportation temperature ranges from -25 ° C to 40 ° C. Without a battery, the storage and transportation temperature can be extended to -25 ° C to 70 ° C. No derating is required below an altitude of 1000 meters, and a derating of 5%/1000 meters is required below 3000 meters. The controller can be installed in a 19 inch rack with a depth of at least 600 mm, and a 70 mm cooling air gap must be left on both sides to prevent deformation and overheating of the casing. For on-site engineers, mastering their architecture, safety interfaces, maintenance cycles, LED diagnostics, fuse specifications, and component replacement processes is key to reducing downtime.