Meggitt Vibro Meter RPS 6U rack power module

RPS 6U 110 DC 110V DC 80~145V DC High Voltage DC Power Supply Scenario

AC input type RPS 6U AC 110/230V AC 90~264V AC (adaptive) universal AC power supply scenario, compatible with global voltage standards

RPS 6U AC (Special) 115V AC 90~132V AC Specific Area 115V AC System

Special adaptation: The AC type also supports 178-264V DC input, achieving "AC/DC dual compatibility" and further enhancing scene adaptability.

Rear panel and installation configuration

RPS 6U requires a dedicated rear panel for power input and protection. Different panels are compatible with different input types and functional requirements. The core panel types and characteristics are as follows:

Panel type, model number, core function, adaptation scenario

Standard DC panel 200-582-920-01h single channel DC screw terminal input, with backplane connection for ordinary DC power supply scenarios

Dual DC input panel 200-582-990-01h, two independent DC terminal inputs, critical scenario where dual DC power redundancy is required for parallel backplane connection

Industrial environment with grounded DC panel 200-582-922-01h standard DC terminal+M.A.L.T. grounding terminal requiring strengthened grounding protection

Standard AC panel 200-582-910-02h AC socket+fuse+filter universal AC power supply scenario

Scenario where AC panel with switch 200-582-911-02h AC terminal+power switch+fuse requires manual control of power on/off

Dual AC redundant panel 200-582-960-03h with two AC sockets and automatic switching circuit for AC power redundancy, automatic switching in case of faults

AC+DC hybrid panel 200-582-970-01h AC socket+DC terminal, independently connected to the backplane and compatible with AC/DC input in flexible scenarios

Installation note: All rear panels are pre installed with cables, which can be directly connected to the rack backplane without the need for on-site wiring; DC input needs to distinguish between positive and negative poles, while AC input needs to confirm voltage level and frequency compatibility.

Ordering Information and Additional Instructions

（1） Core ordering parameters

Power module selection: It is necessary to specify the "model+input type+order number", for example:

24V DC input: model RPS 6U 24 DC, order number 200-582-200-01h;

110/230V AC input: model RPS 6U AC, order number 200-582-500-01h;

Note: "h" in the number represents the hardware version, minor changes do not affect interchangeability.

Rear panel selection: Choose according to input type and protection requirements, for example, choose 200-582-960-03h for dual AC redundant scenarios, and 200-582-922-01h for strengthened grounding DC scenarios.

（2） Key precautions

Power matching: Calculate the total power consumption based on the number of cards in the rack, ensuring that it does not exceed the rated power of RPS 6U (300W). For example, for 12 MPC 4 cards, priority should be given to redundant deployment;

Temperature management: During installation, it is necessary to reserve heat dissipation space to avoid modules being placed in close proximity to high heating equipment. For environments above 60 ℃, attention should be paid to power derating (1%/℃);

Redundant configuration: When deploying redundancy, it is necessary to use RPS 6U modules of the same model to ensure consistent output characteristics and avoid uneven load;

Compliant use: Only applicable to VM 600 series racks, prohibited for use in other non compatible systems to avoid damage caused by electrical mismatch.