TOSHIBA TOSBERT TM VF-nC1 Industrial Inverter

Self modification/repair;

Natural disasters (fire, earthquake) or abnormal voltage;

Out of range applications (such as driving single-phase motors).

Compliance and Disposal

8.1 Certification Compliance Requirements

CE certification:

EMI filters need to be installed on the input side (such as EMFA2006Z suitable for 200V low power);

Shielded wires are used for the main circuit/control circuit, and the shielding layer is grounded (with a distance of less than 10cm from the inverter);

UL/CSA certification:

Use copper wires above 75 ℃, equipped with CC/J level fuses (such as 4A fuses for the 2002P model);

Branch circuit protection must comply with local electrical regulations (such as NEC in the United States and CEC in Canada).

8.2 Equipment disposal

Mandatory requirement: Waste frequency converters must be disposed of by professional industrial waste disposal institutions (self disassembly is prohibited);

Risk Warning: Self disposal may lead to capacitor explosion and release of toxic gases, violating the Waste Disposal and Cleaning Law;

Contact organization: You can contact Toshiba's regional branches at the end of the manual to obtain compliance disposal channels.