Sumitomo Cyclo F71m/4 Induction Motor 0.37kW CNVMS04-6095G-35/G
Overview
The Sumitomo Cyclo F71m/4 Induction Motor is an asynchronous electric motor rated at 0.37kW. It is identified by the F71m/4 motor reference and the CNVMS04-6095G-35/G assembly number. This motor is designed for use with compatible Sumitomo Cyclo drive systems. It converts electrical energy into mechanical rotation for industrial machinery. The 0.37kW rating makes it suitable for small to medium loads in conveyors, mixers, packaging equipment, and automation systems. The motor is built for reliable continuous operation and smooth power delivery. It is an important part of the power transmission chain in many industrial applications.
Induction Motor Technology
An induction motor uses a rotating magnetic field to induce current in the rotor. This current interacts with the magnetic field to produce torque. The F71m/4 is a four pole motor, which determines its base speed at a given frequency. Induction motors are known for their simple construction, durability, and low maintenance requirements. The motor housing protects internal windings and bearings from dust and moisture. Cooling fins or a fan help dissipate heat during operation. Proper winding insulation supports reliable performance under varying load conditions. The motor is designed to operate within specified voltage and frequency ranges. Correct power supply and wiring are essential for safe operation.
Cyclo Drive Integration
The Sumitomo Cyclo F71m/4 motor is designed to integrate with Cyclo speed reducers. The CNVMS04-6095G-35/G reference indicates the combined motor and gearbox configuration. The Cyclo reducer provides high torque capacity and smooth operation. Together, the motor and reducer deliver the required output speed and torque for the application. The motor shaft and reducer input are matched for proper coupling. Alignment and mounting are important for reliable operation. The combined unit is used in applications that require precise speed reduction and dependable power transmission. Proper lubrication and maintenance of the reducer help extend the life of the entire drive package.
Compatibility and Installation
Technicians should confirm that the motor matches the required voltage, frequency, and mounting configuration. The F71m/4 and CNVMS04-6095G-35/G references help identify the correct unit. The motor should be mounted securely to prevent vibration and misalignment. Electrical connections should follow applicable codes and motor wiring diagrams. The direction of rotation should be checked before coupling to the load. The motor should be protected from excessive heat, moisture, and dust. After installation, the unit should be tested for smooth operation and correct current draw. Following approved installation procedures helps ensure reliable performance and long service life.
Applications
The Sumitomo Cyclo F71m/4 Induction Motor is suitable for many industrial applications. It can be used in conveyor systems, packaging machines, mixers, agitators, and material handling equipment. In these applications, the motor provides reliable power for continuous duty. The 0.37kW rating is appropriate for small to medium loads. The motor can be combined with a Cyclo reducer to increase torque and reduce speed. It is also used in automation systems where precise motion control is required. For machine builders and maintenance teams, this motor is a practical choice for dependable power transmission.
Maintenance and Care
Regular maintenance helps ensure the long life of the induction motor. The motor should be kept clean and well ventilated. Cooling passages and fins should be free from dust and debris. Bearings should be inspected for noise and vibration. Lubrication should follow the manufacturer recommendations. Electrical connections should be checked for tightness and signs of overheating. Insulation resistance may be tested during major service. If the motor runs hot or draws excessive current, the load or power supply should be checked. Following a scheduled maintenance program helps prevent unexpected failure and maintains reliable operation.
Conclusion
The Sumitomo Cyclo F71m/4 Induction Motor 0.37kW CNVMS04-6095G-35/G is a reliable asynchronous motor for compatible Cyclo drive systems. It provides smooth power delivery, durable construction, and dependable performance. Its integration with Cyclo reducers supports high torque and precise speed reduction. Correct selection, installation, and maintenance help ensure long service life. For industrial machinery and automation systems, this motor is a practical and efficient power transmission component.
