Sumitomo T.SBXH1.5PL-25PD 100Gbs DP-QPSK LN Modulator 1.55 um QAM GPPO Connector
Overview
The Sumitomo T.SBXH1.5PL-25PD is a lithium niobate optical modulator designed for high speed coherent fiber optic transmission. It is identified by the T.SBXH1.5PL-25PD model reference and supports 100Gbs DP-QPSK modulation formats. The device operates at a wavelength of 1.55 um, which is standard for long distance and metro optical networks. It also supports QAM modulation for higher capacity transmission. The modulator uses GPPO connectors for radio frequency input and optical fiber interfaces. Lithium niobate technology provides high electro optic efficiency, low drive voltage, and stable performance. The device is used in optical transponders, line cards, and coherent test equipment.
Modulation Technology
DP-QPSK stands for dual polarization quadrature phase shift keying. This modulation format encodes information in both the phase and polarization of the optical signal. It allows 100Gbs transmission over a single wavelength. The T.SBXH1.5PL-25PD integrates multiple Mach Zehnder modulators on a single lithium niobate chip. These modulators manipulate the phase and amplitude of the light. The device also supports QAM formats, which increase spectral efficiency for higher data rates. The GPPO connectors provide high frequency electrical interfaces for the drive signals. The modulator requires precise bias control to maintain stable operation. Proper temperature control helps maintain the operating point. The design supports long haul and regional optical networks.
Optical and Electrical Characteristics
The Sumitomo T.SBXH1.5PL-25PD operates at 1.55 um, which is in the low loss window of standard single mode fiber. It has low insertion loss and high extinction ratio. The device supports high speed modulation with low drive voltage. The GPPO connectors are designed for high frequency signals up to the required bandwidth. The optical input and output fibers are polarization maintaining or standard single mode depending on the configuration. The modulator chip is mounted in a rugged package that protects it from environmental stress. The device may include monitor photodiodes for bias control. The electrical and optical specifications are designed to meet coherent transmission requirements. Stable operation helps maintain signal quality over long distances.
Compatibility and Integration
The T.SBXH1.5PL-25PD is compatible with 100Gbs coherent transponder designs. It can be integrated into line cards and optical modules. Technicians should confirm the connector type, fiber type, and drive requirements before installation. The modulator should be handled with care to avoid damage to the optical and electrical interfaces. Fiber connectors should be cleaned before mating. The GPPO connectors should be torqued to the recommended specification. Bias control circuits should be configured for the specific modulation format. Temperature control should be maintained within the specified range. Following approved integration procedures helps ensure reliable performance and long service life.
Applications
The Sumitomo T.SBXH1.5PL-25PD LN Modulator is used in coherent optical transmission systems. It supports 100Gbs and higher data rates using DP-QPSK and QAM formats. It is deployed in long haul networks, metro networks, and data center interconnects. It is also used in optical test equipment and research laboratories. In these applications, the modulator provides the high speed encoding needed for advanced optical signals. Its lithium niobate technology offers low loss and high stability. For network operators, the modulator helps increase capacity and reach. For equipment manufacturers, it provides a reliable component for coherent transponder design. The GPPO connector simplifies high frequency electrical integration.
Maintenance and Care
Optical modulators require careful handling and maintenance. The optical connectors should be kept clean and covered when not in use. Dust or contamination can increase loss and damage the fiber end face. The GPPO connectors should be inspected for wear and tightened correctly. The device should be stored in a protective package. Operating temperature should be controlled to maintain bias stability. Bias control circuits should be checked periodically. If performance degrades, the modulator may require recalibration or replacement. Following approved handling procedures helps prevent damage. These practices help ensure reliable operation and long service life in coherent transmission systems.
Conclusion
The Sumitomo T.SBXH1.5PL-25PD 100Gbs DP-QPSK LN Modulator is a high performance component for coherent optical transmission. It supports 1.55 um operation, QAM formats, and GPPO connectivity. Its lithium niobate design provides low loss, high speed, and stable modulation. Correct integration, clean optical interfaces, and proper bias control help ensure dependable service. For optical network and equipment professionals, this modulator is a key building block for advanced fiber optic systems.
