Advant® Master S100 I/O system

S100 I/O is the central process interface for Advant

Controller 400 series process controllers. Thanks to

built-in cablemarshalling facilities and parallel

communication with the host controller, it is the

right choice for centralized I/O systems and

high-speed applications.

The range of process I/O modules is complete,

consisting of general purpose digital and analog

inputs and outputs and special interfaces for special

tasks. These specials include pulse counting,

frequency measuring, positioning, motor speed

control and communication with other controllers.

All I/O modules provide simple interfacing, accurate -

yet fast - control, and easy integration of individual

loops into a comprehensive plant-wide control

and supervision system.

The interface modules connect to the process

through screw terminals on connection units

normally installed inside, at the back of the cabinet.

This solution keeps noise and destructive voltage

spikes away from the central electronics and

provides a neat and tidy process interface that is

easy to maintain.

Prefabricated cables interconnect modules with

connection units. The cables come in different

lengths, permitting termination and marshalling

in controller cabinets, in adjacent cabinets, or in

cabinets a greater distance away.

There are connection units that support signaloriented

or device-oriented field wiring. The former

means that field wires with the same electrical

characteristics (e.g. all 24 V d.c. inputs) are grouped

and terminated together, the latter that field wires

to/from the same field devices are grouped and

terminated together. The combination means

maximum installation flexibility.

On-board processing capabilities

The process I/O modules are “intelligent” in the sense that module-related signal and data processing is performed on board as opposed to centrally, by the CPU of the host controller. Time tagging of events, filtering and gain control are some examples of board-level tasks. This functional distribution improves real-time performance and reliability of the system as a whole and maintains processing capacity when the system is expanded.

Comprehensive self-diagnostics

Comprehensive self-diagnostics continuously monitor the modules and report any errors through LEDs on the module fronts and through alarm messages and indications to process operator stations.

Malfunctioning inputs can be disabled and simulated by manual entry while failing outputs are deactivated or driven to a predetermined safe state automatically. All I/O modules can be replaced while the system is in service. Some modules can even be arranged, transparently into dually redundant configurations

forenhanced availability.

High disturbance immunity

All modules conform to the highest standards of electromagnetic noise immunity and satisfy the

requirements of the EU directives 2014/30/EU and 2014/35/EU. For the above reasons, S100 I/O is likely to be the best help you can get for putting your control system in touch with

Analog inputs

±10 V/±20 mA

• 16 ch., differential, 12 bits + sign resolution, CMV ≤ 50 V,

CMRR > 100 dB (at 50 Hz), (DSAI 130A)

0…+10 V/0…+20 mA

• 32 ch. (DSAI 133A1), single-ended, 12 bits resolution

-100…+320/-200…+640°C

• 31 measuring + 1 reference ch., Pt100, 3-wire, 12 bits + sign

resolution, (DSAI 146)

Thermocouples

• 14 measuring, 2 reference + 1 compensation ch., measuring

ranges B, C, E, J, K, R, S and T with grounded or floating output

signals, 12/13 bits + sign resolution, CMV ≤ 16 V,

CMRR > 100 dB (at 50 Hz), (DSAI 155A)

Digital outputs

24…250 V a.c. or d.c.

• 32 ch., (DSDO 115A/DSTD 108P), relay contacts.

Relay data: Load current; max. 3 A, min 0,1 A at 24 V d.c. or

2,5 VA a.c. Breaking capacity a.c max 720 VA at cos Φ > 0.4;

d.c. max 44 W at L/R <40 ms.

• 32 ch., (DSDO 115A/DSTD 108LP), relay contacts.

Relay data: Load current; max. 200 mA, min 1 mA, 0.05 VA. Breaking

capacity a.c max 5 VA at cos Φ > 0,4; d.c. max. 5 W at L/R

<40 ms.

24 V d.c.

• 32 ch., short-circuit-proof transistor, max. 500 mA, (DSDO 115A)

• 32 ch., (DSDO 115A/DSTD 109P) short-circuit-proof transistor,

max. 2 A

Pulse counting and positioning

5/12/24 V d.c.

• 12 ch., max. 10 kHz, (DSDP 150)

Complete interface (DSDP 140A) for one positioning loop,

consisting of:

• Pulse inputs: 3 (A, B and STROBE), ±15 mA, max. 80 kHz DI/DO:

24 V d.c. DO max. 150 mA AO: ±10V/±20 mA, 11 bits resolution

Complete interface (DSDP 170) for

• 4 position transducers, each circuit consisting of: Pulse inputs:

3 (A, B and STROBE), 5/12/24 V or ±15 mA d.c., max. 2.5 MHz

DI/DO: 24 V d.c. DO max.150 mA

Digital speed control of motors

Complete interface (DSDC 111) for one d.c. motor, consisting of:

3 pulse inputs for A, B and STROBE

1 DI, 24 V d.c.

1 DO, 24 V, 150 mA d.c.

1 AO, ±10 V/±20 mA, 12 bits resolution