ABB GVC704AE01 Medium voltage inverter

ABB GVC704AE01 Medium voltage inverter

INTRODUCTION

The ABB GVC704AE01 is a semiconductor thyristor module manufactured by ABB and not a complete product labelled directly as a ‘Medium Voltage Inverter’. However, in industrial automation and control systems, thyristor modules are often used to build or supplement the core control section of a medium voltage inverter.

Product Features

Controllability: GVC704AE01 is not only unidirectional conductive, but also controllable, capable of controlling high-power electromechanical devices with milliamperes of current.

High performance: The module excels in power amplification, response speed, and non-contact operation, and has the advantages of high efficiency and low cost.

Wide range of applications: ABB's automation equipment, including its modules and control systems, is widely used in a variety of industries, including water supply, building infrastructure, data centres, renewable energy, machine automation, materials handling, marine and more.

PARAMETERS

Input voltage: 48V
Output voltage: 12V
Rated current: 70A
Rated power: 840W
Efficiency: >98%
Power density: >1kW/L
Ripple noise: <5mV
Operating temperature: -40°C~125°C

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.