ADVANTEST R3752A Network Analyzer

ADVANTEST R3752A Network Analyzer

Product Overview

The ADVANTEST R3752A Network Analyzer is a high-performance network analyser for measurement and analysis of radio frequency (RF) and microwave networks. It is equipped with high sweep rate, wide frequency range, high dynamic range and built-in programmers to meet a variety of complex test requirements.

Key Features

Wide frequency range: The R3752A supports a frequency range from 5Hz to 500MHz, covering a wide range of frequency bands from low to high frequencies, making it suitable for a wide range of test scenarios.

High Sweep Rate: The network analyser has a high sweep rate of up to 0.1ms/acquisition point, which can quickly capture signal changes and improve test efficiency.

High Dynamic Range: The 115dB dynamic range ensures accurate and reliable testing, and stable measurement results can be obtained even in the case of large differences in signal strength.

Built-in programmer: The built-in programmer enables the R3752A to automatically execute complex test sequences, reducing manual intervention and improving test consistency and repeatability.

Multiple Measurement Channels: Provides 2 measurement channels and 4 curve displays, supporting simultaneous measurement of multiple parameters or signal characteristics under different conditions.

Technical specifications

Frequency range: 5Hz to 500MHz

Sweep rate: 0.1ms/acquisition point

Resolution: 10kHz

Dynamic range: 115dB

Measurement channels: 2 measurement channels, 4 curves

Built-in function: Built-in BASIC controller, supports high-speed evaluation function and external device control.

Application Areas

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.

Precautions for use

Before use, please read the product manual carefully to understand the operation method and precautions of the product.

During the testing process, please ensure that the equipment is in a stable working environment to avoid the influence of temperature, humidity and other environmental factors on the test results.

Regularly calibrate and maintain the equipment to ensure the accuracy and reliability of the test results.

In case of equipment failure or abnormalities, please contact ADVANTEST's after-sales service department in time.