ADVANTEST R3754A /3754B New Netw ork Analyzer

ADVANTEST R3754A /3754B New Netw ork Analyzer

Optimization for Each Application 

Optimization has been made by setting the measurement frequency range to the limited bandwidth of 10 kHz to 150 MHz. The R3754 Series can be used for adjustment and test in the production and inspection processes of crystal, ceramic, LC, and sensor parts. Two types of display units are selectable according to the application. It is recommended to use the R3754A with monochrome display for the pre-process and the R3754B with color display for shipment inspection and receiving inspection. 

Doubled M aximum Sw eep Speed and High Throughput 

Advantest in the R3754 has doubled the sweep speed in comparison to our previous model. The newly developed measurement algorithm greatly improves the total throughput. The improved noise floor and increased maximum input level create a measurement dynamic range of 127 dB (a 13 dB increased over the previous model). It is possible to measure the high attenuation filter at high speed. A 15 dB improvement in the C/N suppress the trace noise and enhance the throughput and basic performance. Fluctuation in the trace has been reduced to 1/5 the amount in previous instruments. The required time to achieve the specification-guaranteed stabilization from power-on has also been reduced to 1/3. 

Self-diagnostic Function M inimizing Dow n Time 

The attitude of Advantest is: if the unit should have a fault, how is it possible to reduce the down time of the production line? One of the answers is the self-diagnostic function. The R3754 series is loaded with a powerful self-diagnostic function. Advantest's position is that in the event that any failure occurs, downtime must be minimized.

Product Features

Small size design: meet the demand of modern mobile communication terminals for electronic devices with small size and light weight.

Excellent performance: with the ability of rapid measurement, faster and more accurate measurement of devices.

Multi-Channel Selection: Different channels (e.g. Input Channel 2, Input Channel 3) can be selected according to different purposes to meet different working needs.

Advanced test function:

TDR Analyser: Multiple reflections on the time axis can be analysed to provide detailed signal reflection information.

RLA System DLD Measurement Functions: Provides a variety of test functions to meet user needs, such as driver level measurement and parallel I/O.

High scanning speed and dynamic range: A scanning speed of 50μs/point and a wide dynamic range of 127dB ensure efficient and accurate measurements.

Built-in analysis templates: Built-in analysis templates for a variety of appliances facilitate quick analysis and testing.

Technical Parameters

Scanning speed: 50μs/point

Dynamic range: 127dB

Channel selection: support dual-channel or multi-channel (according to options)

Test function: TDR analysis, RLA system DLD measurement, driver level measurement, parallel I/O, etc.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider