ALSTOM ESA-700 EPSD-0375-1108 Flame signal analyzer

ALSTOM ESA-700 EPSD-0375-1108 Flame signal analyzer

DESCRIPTION

The ESA-700 EPSD-0375-1108 Flame Signal analyzer is an instrument for the analysis of flame signals, which can be used to detect the presence of a flame, the state of combustion and other relevant parameters. The following is an introduction to some flame signal analyzers:
Ultraviolet flame monitor: ESA-700 EPSD-0375-1108 consists of two parts: monitor and sensor, the sensor is the ultraviolet flame sensor, dedicated to the detection of flame, it is particularly sensitive to ultraviolet light, and can convert the ultraviolet light signal emitted in the flame into electrical signals; The monitor is used to amplify and display the electrical signal of the sensor (" flame "or" flame out "), and control the external equipment through the relay output contact.

PARAMETERS

Brand: Alstom
Model:ESA-700 EPSD-0375-1108
Voltage (DC) : 24 V- DC
Custom Description: Flame signal analyzer
Weight:0.80 pounds
Dimensions:6.25 x 4.50 x 2.25

Basic Product Information

Model: ALSTOM ESA-700 EPSD-0375-1108

Type: PLC control module

Brand: ALSTOM

Function: For data processing and control in industrial automation system

 Features and Functions

Support operation mode: support single-phase and three-phase operation, can be used alone or configured with two circuit breakers for work.

Automatic reclosing function: provides four automatic reclosing schemes with different action time modes, each mode can be set to trigger reclosing twice, and the second reclosing is always a three-phase reclosing with an independent fixed delay.

Signal isolation and filtering:

Typical signal isolation uses optoelectronic isolation technology to effectively isolate the input and output of the microcontroller and reduce the propagation of interfering signals and noise.

Metal shielding is used to isolate space radiation, and the analogue circuits that are particularly afraid of interference (e.g., high-sensitivity weak-signal amplification circuits) are shielded.

Filtering technology is used to control the direction of various types of signals, including low-pass, high-pass, and band-pass filters to cope with signals of different frequency characteristics.

 Application Scenarios

Industrial automation: It is suitable for industrial automation and control systems, especially in occasions requiring high-precision control and data processing.

Transmission lines: Improve the reliability and stability of the system through the automatic reclosing function.

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider