Bosch Rexroth 4WRPEH 6 C4B40P-2X/G24K0/A1M Proportional Directional Valve (0 811 404 647)
Product Overview and Electro-Hydraulic Valve Design
The Bosch Rexroth 4WRPEH 6 C4B40P-2X/G24K0/A1M, material number 0 811 404 647, is a direct-operated four-way proportional directional control valve with integrated control electronics (OBE) and electrical position feedback. Designed for size 6 mounting interfaces, this valve controls both the direction and flow rate of hydraulic fluid in response to an electrical command signal.
By integrating the control electronics directly onto the valve body, the 4WRPEH series reduces cabinet wiring complexity and minimizes signal noise susceptibility. Closed-loop spool position feedback monitors actual spool movement against the command signal, delivering high repeatability, low hysteresis, and accurate flow metering across varying hydraulic pressures.
Type Code Breakdown: 4WRPEH 6 C4B40P-2X/G24K0/A1M (0 811 404 647)
Each segment of the Bosch Rexroth hydraulic valve designation defines nominal size, spool function, flow rating, series generation, electrical supply, and signal interface.
Valve Series and Size (4WRPEH 6): Identifies the 4WRPEH four-way proportional directional valve with electrical position feedback and integrated electronics in nominal size 6.
Spool and Flow Configuration (C4B40P): Specifies the spool symbol, flow characteristic, and nominal flow rating for this configuration variant.
Component Series (2X): Denotes component series 2X, establishing standardized mounting dimensions, internal hydraulic geometry, and electronics design.
Supply Voltage and Electronics Option (G24K0): Indicates a 24 V DC nominal power supply for the integrated control electronics and solenoid actuation system.
Command and Feedback Interface (A1M): Defines the electrical command signal and diagnostic/monitoring configuration for integrating the valve into industrial control loops.
Material Number (0 811 404 647): Unique Bosch Rexroth part number identifying the exact factory build of the valve assembly.
Dynamic Response and Hydraulic System Integration
Proportional valves with electrical spool position feedback such as the 4WRPEH 6 are well suited for closed-loop velocity and position control of hydraulic cylinders and motors. Rapid spool response enables smooth acceleration and deceleration profiles while limiting hydraulic shock and pressure peaks in manifold blocks.
Clean hydraulic oil filtration, proper system bleeding, and stable 24 V DC power supply wiring are essential to maintain dynamic accuracy and long service life in industrial hydraulic circuits.
Industrial Applications
The 4WRPEH 6 C4B40P-2X/G24K0/A1M valve (0 811 404 647) is applied in die casting and injection molding machines, hydraulic presses, machine tools, test rigs, and industrial automation systems requiring accurate, repeatable proportional flow control.




